4
ENGLISH
Getting started
Connections Operations Troubleshooting Specifications Index
NOTE
• Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the owner’s manual of the
other components.
• Be sure to connect the left and right channels properly (left with left,
right with right).
• Do not bundle power cords together with connection cables.
Doing so can result in humming or noise.
• Do not connect the unit to the PHONO input connectors on the
amplifier.
Analog connections
Audio cables
Analog connections (stereo)
(White)
(Red) R
L
R
L
Audio cable (supplied)
R
L
R
L
AUDIO
RL
IN
TUNER
Amplifier
Connecting an antenna
• Connect the FM antenna or AM loop antenna included with the unit
to enjoy listening to radio broadcasts.
• After connecting the antenna and receiving a broadcast signal
(vpage 5 “Listening to FM/AM Broadcasts”), use tape to fix the
antenna in a position where noise is the lowest.
nAM loop antenna assembly
1Put the stand section
through the bottom of
the loop antenna from
the rear and bend it
forward.
Stand
Square
hole
Projecting
part
Loop
antenna
2Insert the projecting part
into the square hole in
the stand.
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
• If the signal has noise interference, connect the ground terminal
(GND) to reduce noise.
• If you are unable to receive a good broadcast signal, we recommend
installing an outdoor antenna. Inquire at the retail store where you
purchased the unit for details.
nUsing the AM loop antenna
To use suspended on a wall
Suspend directly on the wall without
assembling.
Nail, tack, etc.
To use standing alone
Use the procedure below to assemble.
Connecting the power cord
To household power outlet
(AC 230 V, 50 Hz)
Power cord
(supplied)
NOTE
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not unplug the power cord while the unit is operating.
Connections
w eq
FM outdoor
antenna
75 Ω Coaxial
cable
Ground AM outdoor
antenna
AM loop antenna
(supplied)
FM indoor
antenna
(supplied)