Denso CU-7011 Chapter 5 Applying Power to the CU-7011

4
•If smoke, abnormal odors or noises come from the CU,
immediately unplug the AC adapter from the wall socket
and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•If foreign material or water gets into the CU, immediately
unplug the AC adapter from the wall socket and contact
your nearest dealer.
Failure to do so could cause fire or electrical shock.
•If you drop the CU so as to damage its housing, immedi-
ately unplug the AC adapter from the wall socket and con-
tact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•Use the dedicated AC adapter only. Failure to do so could
result in a fire.
•Never use the CU on the line voltage other than the speci-
fied level. Doing so could cause the CU to break or burn.
•If the power cord of the AC adapter is damaged (e.g.,
exposed or broken lead wires), stop using it and contact
your nearest dealer.
Failure to do so could result in a fire or electrical shock.
WARNING
CAUTION
Chapter 5 Applying Power to the
CU-7011
Apply power to the CU-7011 via the dedicated AC adapter.
Connect the outlet plug of the AC adapter to the power inlet connector of the CU-7011,
then plug the other end of the AC adapter into a wall socket.
•If you are not using the CU for a long time, be sure to
unplug the AC adapter from the wall socket for safety.
Failure to do so could result in a fire.
•When caring for the CU, unplug the AC adapter from the
wall socket for safety.
Failure to do so could result in an electrical shock.
•Never cover or wrap up the CU or AC adapter in a cloth or
blanket.
Doing so could cause the unit to heat up inside, deforming
its housing, resulting in a fire.
Always use the CU and AC adapter in a well-ventilated
area.
•Keep the power cord away from any heating equipment.
Failure to do so could melt the sheathing, resulting in a fire
or electrical shock.
AC adapter
Power inlet connector