Denso GT-10Q Transfer of selected characters, Retransmit scanned data, Very practice-orientated

•ON/OFF function:

The scanner is in standby mode when the Magic Key is off.

Transfer of selected characters

•The data to be transmitted (e.g. opera- tion start codes) can be set beforehand when the Magic Key is on

Retransmit scanned data

•Scanned data can be retransmitted when the Magic Key is on without the bar code having to be scanned again

Technical Data

User-friendlyi ly

Very practice-orientated

•Marking function (GT-10Q):

laser lighting of the scan area and its centre point

•Vibrator function:

Completion of the scanning operation confirmed with vibration

•Adjustable buzzer volume:

3 levels of buzzer volume to suit the surrounding environment

•Very bright, three-colour LED: Easy to read scanning information

Simple set-up with intuitive software

•Installation software included in scope of delivery

•Easy parameter setting from a PC with the set-up software

•Quick start programme:

Printing and configuring barcodes with the aid of the special installation soft- ware – the GT-10 is ready immediately

			GT-10B		GT-10Q
			GT-10B-SM(Standard Range Type)	GT-10B-LM(Long Range Type)	GT-10Q-SR	GT-10Q-SU
					(RS-232C)	(USB)
Scanner	Readable Codes	Bar Codes	EAN-13/8, UPC-A/E, UPC/EAN (with add-on), Interleaved 2 of 5, STF, CODABAR (NW7), CODE39, CODE93,
			CODE128 (EAN-128), MSI, Plessey
		2 Dimensional Codes			QR Codes, Micro QR Codes, DataMatrix
					(ECC200), PDF417, Maxi Code,
					RSS variants, Micro
	Resolution	Bar Codes	0.125 mm	0.19 mm	0.15 mm
		2 Dimensional Codes			0.25 mm
	Image capture funktion				Ja
	Focusing point				100 mm
	Marker				Scanning area marker
	Scanning area (at Narrow bar 0,5 mm)(1)		0 ~ 350 mm max	0 ~ 700 mm max
	PCS value		0.45 min
	Scanning angle (angle of elevation)		40° ≥ a ≥ 0°
	Skew angle				360 degrees
	Elevation and inclination				± 35 degrees
	Reading confirmation		Blue-green-red LED, buzzer (with volume control), vibrator
I/F	Format/Connector Type/Cable Length		Multi Interface: programmable as RS-232C or keyboard interface		RS-232C/	USB 1.1 Compliant/
					Dsub-9S	USB Typ A
Input Power	Operating Voltage Range		4.75 ~ 5.25 V
	Power Consumption		While Scanning: 200 mA max
Power supply					AC adapter	Supply from
						connected device(2)
Environmental	Water proof		IP 54 (Equivalent to JIS Splash resistance)
Requirements	Shock-resistant		2 m (1 x 6 directions onto concrete floor)(3)
	Operating Temperature Range		0 °C ~ 50 °C
	Operating Humidity		10 ~ 90 % RF (No condensation or frost)		10 ~ 99 % RF (No condensation or frost)
	Operating ambient illumination		500 lux ~ 10 000 lux (daylight florescent lighting)		20 lux ~ 10 000 lux (daylight florescent lighting)
Weight (unit only)			Approx. 190 g (without cable)		Approx. 210 g (without cable)

(1): Ambient illumination 500 lux, ITF/16 columns on label, when PCS = 0.9.

(2): An attempt to make a connection may fail if the PC or USB hub used is not compatible. Check transfer compatibility.

(3): Test value, not guaranteed.