Safety Information

Continued

15.Install the heater such that it is not directly exposed to water spray, rain, dripping water and/or wind.

16.Operate only on a stable, level surface.

17.Due to the high surface and exhaust tempera- tures, adults and children must observe clear- ances to avoid burns or clothing ignition.

18.Do not move, handle or service while hot or burning. Do not attach or remove a hot or operating heater from the propane/LP tank.

19.Before each use, check heater for leaks. Never use an open flame to check for leaks. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks.

20.Keep all connections and fittings clean. Make sure propane/LP tank valve is clean. Check "O" ring on heater inlet fuel valve connector for damage before each use. Replace if worn or damaged.

21.Use only in accordance with local codes or, in the absence of local codes, with the Standard for the Storage and Handling of Liquefied Pe- troleum Gases ANSI/NFPA 58 and CSA B149.1, Natural Gas and Propane Installation Code.

Assembly

Instructions

30,000 Btu Models ONLY

1.Inspect the heater components for possible shipping damage. If any is found, immediately notify the dealer. Check to make sure that all components are included with your heater (see pages 8 and 9).

2.Insert the piezo ignitor into the bracket on the burner support bracket as shown in Figure 1. Tighten the piezo mounting nut. Do not over tighten the nut.

3.Connect the burner hoses together as shown in Figure 2. Wrench tighten to insure leak tight connection.

4.Mount the burner assembly onto the support arm using the burner head mounting brackets and brass screws as shown in Figure 3. Place side of bracket into the slot on support arm. Se- cure with screw. Make certain that the air holes on the sides of the burner tube are not blocked. Securely tighten the burners into place.

5.Attach the electrode wires to the piezo ignitor as shown in Figure 4.

Piezo Ignitor

Piezo

Mounting

Nut

Burner

Support

Bracket

Figure 1 - Installing Piezo Ignitor

Figure 2 - Attaching Burner Hoses to

Regulator

Burner Head

Assembly

Slot Support

Arm

 

Air Hole

Brass Screw

Burner Head

Mounting Bracket

 

Figure 3 - Attaching Burner Head

Assembly to Support Arm

Piezo Ignitor

Electrode Wires

Figure 4 - Attaching Electrode Wires to

Piezo Ignitor

www.desatech.com117240-01C

Page 4
Image 4
Desa 000 BTu, 10, 000-30 owner manual Assembly Instructions, 30,000 Btu Models only

000-30, 000 BTu, 10 specifications

Desa 000-30, 10,000 BTU is a remarkable heating solution designed for both residential and commercial spaces. This heater stands out for its efficient performance and user-friendly features, making it a popular choice among consumers looking to enhance their heating experience.

One of the primary features of the Desa 000-30 is its impressive heat output of 10,000 BTUs, which is suitable for spaces up to 300 square feet. This capability ensures rapid heating, allowing users to achieve their desired comfort levels quickly. The appliance is equipped with a reliable thermostat that automatically maintains the set temperature, providing consistent warmth while conserving energy.

The design of the Desa 000-30 is another highlight. It features a compact and portable format, making it an excellent option for various settings, from living rooms to workshops. Its lightweight nature allows for easy transportation, while the sleek, modern look complements various interior styles. Additionally, the heater is built with safety in mind, featuring a tip-over switch and overheat protection, which instantly shuts off the unit if it becomes too hot or is accidentally knocked over.

Another significant aspect of the Desa 000-30 is its fuel efficiency. Utilizing propane or natural gas, this heater operates with minimal waste, providing an economical heating solution that helps users save on utility bills. The advanced burner technology ensures complete combustion, translating to lower emissions and a smaller carbon footprint.

From a technological perspective, the Desa 000-30 employs innovative ignition systems that provide easy startups. The heater can ignite quickly without the need for matches or cumbersome processes. Furthermore, its adjustable heating settings allow users to customize their heating preferences, making it versatile for different environments.

The Desa 000-30 is also relatively low maintenance. It features a straightforward design that simplifies cleaning and upkeep, ensuring longevity and consistent performance. In summary, the Desa 000-30, 10,000 BTU heater offers a combination of efficiency, safety, and convenience, making it a standout choice for individuals seeking a reliable heating solution. With its modern design, energy efficiency, and user-centric features, it undoubtedly provides exceptional value to users looking for comfort and warmth in their living spaces.