Operating

Instructions

1.Check heater for damage. If heater is damaged, promptly inform dealer where you bought heater.

2.Follow all of the safety and operating pre- cautions.

3.Check the "O" ring on the POL before each use. Replace the "O" ring if there is any sign of wear or damage.

4.Make sure heater regulator knob is in the "OFF" position.

5.30,000 Btu Models Only Attach the heater to the guard on the propane/LP cylinder with the support arm on the inside of the guard and bolts through two holes in the guard (see Figure 5). Tighten the support arm bracket into place us- ing the wing nuts provided.

6.For All Models Connect the POL fitting at regulator to the propane/LP cylinder by rotating the POL nut counter clockwise into the propane/LP cylinder's valve outlet and securely tighten with a wrench.

WARNING: Attach heater in upright position. Never attach heater in a horizontal position. This could lead to dangerous flare-ups or fire.

7.Securely tighten all gas connections.

8.Open the cylinder's gas valve and check all connections for leaks. Apply mixture of liquid soap and water to gas joints. Bubbles forming show a leak that must be corrected. DO NOT USE A FLAME.

Support Arm

Support

Bracket

Arm

Bolt

 

Regulator

Figure 5 - Attaching Support Arm and

Regulator to Propane/LP Tank

To START Heater

WARNING: When lighting the heater DO NOT look over top of heater (reflector). Stand to the side of the heater during ignition. Do not stand or have any part of your body in front of the heater.

WARNING: MAKE SURE THERE IS NO OPEN FLAME IN THE AREA. Fully open the valve on the propane/LP cylinder.

Read all lighting instructions before attempting to ignite heater.

1.Turn the heater regulator knob counterclock- wise to the "HI" position.

2.Repeatedly push and release the piezo ignitor (dual burner), or place a lighted match near the face of the heating element (mesh screen) of the burner you are lighting, using the hole located on the side of the reflector. See Figure 6.

CAUTION: Do not light at the orifice.

3.Depress the red button on the safety valve admitting gas to the burner (see Figure 6).

WARNING:Donotdepressred valve button before repeatedly activating the piezo or inserting match.

Red Button on Safety Valve

Figure 6 - Lighting Heater With a Match

117240-01Cwww.desatech.com

Page 5
Image 5
Desa 000-30, 10, 000 BTu owner manual Operating Instructions, To Start Heater

000-30, 000 BTu, 10 specifications

Desa 000-30, 10,000 BTU is a remarkable heating solution designed for both residential and commercial spaces. This heater stands out for its efficient performance and user-friendly features, making it a popular choice among consumers looking to enhance their heating experience.

One of the primary features of the Desa 000-30 is its impressive heat output of 10,000 BTUs, which is suitable for spaces up to 300 square feet. This capability ensures rapid heating, allowing users to achieve their desired comfort levels quickly. The appliance is equipped with a reliable thermostat that automatically maintains the set temperature, providing consistent warmth while conserving energy.

The design of the Desa 000-30 is another highlight. It features a compact and portable format, making it an excellent option for various settings, from living rooms to workshops. Its lightweight nature allows for easy transportation, while the sleek, modern look complements various interior styles. Additionally, the heater is built with safety in mind, featuring a tip-over switch and overheat protection, which instantly shuts off the unit if it becomes too hot or is accidentally knocked over.

Another significant aspect of the Desa 000-30 is its fuel efficiency. Utilizing propane or natural gas, this heater operates with minimal waste, providing an economical heating solution that helps users save on utility bills. The advanced burner technology ensures complete combustion, translating to lower emissions and a smaller carbon footprint.

From a technological perspective, the Desa 000-30 employs innovative ignition systems that provide easy startups. The heater can ignite quickly without the need for matches or cumbersome processes. Furthermore, its adjustable heating settings allow users to customize their heating preferences, making it versatile for different environments.

The Desa 000-30 is also relatively low maintenance. It features a straightforward design that simplifies cleaning and upkeep, ensuring longevity and consistent performance. In summary, the Desa 000-30, 10,000 BTU heater offers a combination of efficiency, safety, and convenience, making it a standout choice for individuals seeking a reliable heating solution. With its modern design, energy efficiency, and user-centric features, it undoubtedly provides exceptional value to users looking for comfort and warmth in their living spaces.