OWNER’S MANUAL
OPERATING POLE TRIMMER
Continued
3.Create a loop in the extension cord and insert the loop through the bottom of the handle. Pull the loop tight around
the molded cord hook (see Figures 6 and 7).
Figure 6 - Inserting Extension Cord Loop Through Bottom of Handle
Note: An optional method of retaining the extension cord is shown in Figure 8 for use with
Figure 8 - Optional Method of Retaining Extension Cord
STARTING THE POLE
TRIMMER
The Pole Trimmer has a trigger lock button located on top of the handle. This safety feature locks the trigger in the OFF position, preventing accidental starting of the Pole Trimmer.
The trigger lock button has three positions.
Position 1 locks the trigger.
Position 2 allows you to squeeze the trig- ger and operate the Pole Trimmer. The trig- ger lock button will automatically spring back to Position 1 when you release the trigger.
Position 3 allows you to lock the trigger in the ON position. This is helpful during con- tinuous trimming for extended periods of time.
Unlocking the Trigger to Start the Pole Trimmer
1.Using your thumb, push the trigger lock button forward to Position 2. Squeeze the trigger lever to the ON position. The Pole Trimmer will start running.
Trigger Lock
Button Position 2
Figure 9 - Manually Operating Trigger with Trigger Lock Button in Position 2
2.Release the trigger lock button while the Pole Trimmer is running. The lock but- ton resets to Position 1 each time you release the trigger to the OFF position.
Trigger Lock
Button Position 1
Figure 7 - Extension Cord Loop Tight
Around Molded Cord Hook
Figure 10 - Trigger in OFF Position with Trigger Lock Button in Position 1
Continued
110939 | 5 | For more information, visit www.desatech.com |
