Pioneer Complete Guide to Using Your Stereo Receiver with Direct Access Tuning

Using the Tuner

Direct Access Tuning

The following steps show you how to tune directly to a specific frequency using the remote control.

	Tuner					1	Press the TUNER.
						1	This selects the TUNER function on the receiver and
	STATION		1	2	3
							sets the remote to the TUNER operation mode.
			4	5	6
	TUNING
2
	MPX BAND	CLASS	7	8	9	2	Press the BAND button to select the
	ACCESS			0
3	DIRECT					4
							band (FM or AM).
							Each press switches the band : FM j AM
	us					3	Press the DIRECT ACCESS button to
						5	activate the direct access tuning
							mode.
							The cursor blinks in the display on the front panel.
							SIGNAL	STEREO	VOLUME
							SELECT	A
							ANALOG SP		dB
					2
						4	Use the number buttons to enter
							the frequency of the station you
							want.
							Example:
							To tune station 106.00 (FM), press: 1 = ` = 6 =
							` = `
							SIGNAL	STEREO	VOLUME
							SELECT	A
							ANALOG SP		dB
								STEREO
							TUNED
							To cancel before inputting the frequency
							Press DIRECT ACCESS, and enter the frequency
							again.

5Adjust the MASTER VOLUME buttons on the remote control or the MASTER VOLUME on the front panel.

OPERATION

55