Initial Set Up
DYNAMIC RANGE CONTROL
This feature makes it possible to enjoy full surround sound effects on Dolby Digital sources even at low volumes. It does this by compressing the dynamic range. Dynamic range is the difference between the loudest and the softest sounds in any given signal. Compressing the range plays sounds so the quieter ones are audible and the louder ones don’t get distorted or become overpowering. This feature only applies to Dolby Digital sources but the MIDNIGHT LISTENING mode (explained on p.40) accomplishes the same end for a variety of sources. If continuing from BASS PEAK LEVEL MANAGER go to step 1. If starting fresh, complete steps
System Setup | BACK |
|
DIGITAL INPUT | MULTI ROOM |
|
SELECT |
| |
|
| |
SPEAKER | CROSSOVER | 1 |
SETTING | NETWORK | |
CHANNEL DELAY | BASS PEAK LEVEL | |
MANAGER |
| |
|
| |
CHANNEL LEVEL | DYNAMIC RANGE |
|
CONTROL |
| |
|
|
Dynamic Range Control BACK
1Press the DYNAMIC RANGE CONTROL button.
2Choose the amount of DYNAMIC RANGE CONTROL, OFF, MID or
MAX, you want.
The default setting is OFF.
3Press the SETUP OK button.
Hold the remote control pointed towards the receiver until you see the “RECEIVED” display on the receiver. If "ERROR" flashes in the display, perform the setup operations from the first step again.
SET UP
SELECT MODE
2
SIGNAL |
|
| VOLUME | |
|
| |||
SELECT |
| A | ||
ANALOG SP |
dB
OFF MID MAX
FOR DOLBY DIGITAL
SETUP
OK
3
Ç
Dynamic Range Control BACK
SELECT MODE
OFF MID MAX
FOR DOLBY DIGITAL
SETUP
OK
This information will be displayed on your TV.
Dynamic Range Control
Select Mode [MID]
(For Dolby Digital)
If you want to change a setting before proceeding
Start over from step one.
You may need to experiment with different Dolby Digital sources before you can use the DYNAMIC RANGE CONTROL setting to suit your low volume listening needs.
memo If you are listening at loud volumes we recom- mend turning the Dynamic Range Control OFF.
41