Pioneer VSX-39TX 5Playing a DVD with Surround Sound, 6For Better Surround Sound, sound setting

Quick Start Guide

5Playing a DVD with Surround Sound

1Turn on the receiver, your TV, and the DVD player.

2Press the STANDARD button on the front panel for the basic surround

sound setting.

You can also press the remote control RECEIVER button and then press the STANDARD button on that screen.

3 Press the DVD/LD button on the remote control.

You should see "DVD/LD" in the display on the receiver.

4 Play a DVD.

6For Better Surround Sound

1 Go through the entire "system setup" procedures as outlined on pages 32-41 of this instruction manual.

If you don't hook up any other components with digital audio or do so following the default settings of the receiver (see p. 14) you won't have to assign any more digital inputs, but many other adjustments will improve the sound tremendously.

2 Experiment with the different sound settings offered with the 2/ DTS and DSP buttons.

For more information see p. 43-47.

3As mentioned above you should go through the "speaker setup" instructions on pages 32-41 to set up your speakers properly. If you don't do this you, at least, need to make sure the CENTER channel is turned off if you don't have a center speaker. Use the instructions on pages 32-35 to get the display below on your remote control.

	Center Sub	Front R
	(not hooked up) woofer
Front L	Speaker Setting	BACK
	+	+
		THX
		FREE
Surround L	+	Surround R
		+

SETUP

OK

Surround back (not hooked up)

If you don't have a center speaker press the CENTER button until the box appears empty. Then press the SETUP OK button to EXIT and go back to the System Setup screen.

VII