Configuring your remote control
You can configure your monitor’s remote control to operate your other devices.
Configure your remote control.
1 Turn on the device manually.
2 Switch the remote control mode to a mode that matches your device. Refer to the table below to select an appropriate mode.
TV |
|
|
| STB | ||
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
|
|
| DVD | ||
|
|
| ||||
z The indicator lights for 3 seconds each time the remote control is operated.
3 Find the remote control code for your JVC device from the table below.
| MODE | Applicable devices | Remote control codes |
| TV | This monitor only |
|
| STB | Not in use |
|
|
| DVD | 0503, 0539, 0623, 1241, 1550, |
| DVD |
| 1602, 1701, 1860, 1863, 1940 |
| 1164, 1275, 1597 | ||
|
| ||
|
| Home Theater in Box | 0623, 1701, 1860, 1863, 1940 |
| AUDIO | Receiver/Home | 0074,1374,1676, 2000, 2001 |
LCD | Theater in Box |
|
15
4 Set the remote control code.
Press and hold | Enter four digit | Release the button |
| number |
|
5 Point the remote control at your device, press 
and confirm that your device is turned off. If your device does not respond, try entering another available code.
Note
zIf none of the code works, refer to “Using the search code function” (P. 16).
