Getting started
Please read P. 10 of this manual to set up your monitor.
Check accessories
9
Install your monitor
Remote control
Cleaning cloth
(For details on using the cleaning cloth, see P. 8.)
Circular polarizing glasses (x2)
(For viewing 3D images)
“AAA/R03” Batteries
(For confirming the monitor works)
WARNING:
Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like.
Follow the instructions on page 8 to attach the stand provided to the monitor.
zPlace the monitor on a flat and stable location. Power requirements
zConnect the power cord only to a 100 - 240 V, 50/60 Hz AC outlet.
Installation requirements
zTo prevent the monitor from falling, thread the belt through the hole on the back of the stand and secure it to the rack, etc.
Hole
zStand, stand cover, screws and plates are also included. For details, refer to page 8.
Belt and screw (not provided)
Insert the batteries
Use two “AAA/R03” dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct.
