Basic Playback
Selecting a Sound Mode
To ensure the best possible surround sound, be sure to complete the set up procedures described in “Setting Up for Surround Sound” (starting on page 32) before using the sound modes. This is particularly important when using the 2(Dolby) Digital or DTS sources. When using the sound modes, using SPEAKERS A will give the best results. If you use SPEAKERS B the sound will be down mixed to the two front B speakers and the surround sound effect will be lost.
Using surround sound
| DSP | 1 | Press RECEIVER. |
1 | STEREO EFFECT +/– | This sets the remote to select the sound mode. | |
|
| ||
Receiver |
| (You can skip this step when using the controls on | |
| MAIN SUB | the receiver.) |
|
| DSP | STEREO |
|
|
THX |
| / dts | EFFECT | 2 | Select the sound mode. |
| THX | ADVANCED | STANDARD |
|
|
| THEATER |
|
| ||
|
|
|
|
|
MIDNIGHT |
| MULTI CH | • For STANDARD \ Press STANDARD | |
| IN | Each press changes the STANDARD mode as | ||
|
| |||
DIGITAL |
| SIGNAL | ||
LOUDNESS | follows: |
| ||
NR | SELECT |
| ||
ADVANCED | STANDARD | STANDARD | STANDARD 7.1 | |
| STANDARD auto | |||
THEATER |
|
|
• For HOME THX CINEMA \ Press THX (or THX CINEMA on the front panel)
Each press changes the THX mode as follows:
DSP MODE
STEREO/
DIRECT
STANDARD
ADVANCED
THX CINEMA
THX CINEMA THX SURR EX
THX AUTO
•For ADVANCED THEATER \ Press ADVANCED THEATER (or ADVANCED on the front panel) ) Each press changes the ADVANCED THEATER mode as follows:
MUSICAL DRAMA ACTION
•For DSP modes \ Press DSP (DSP MODE) repeatedly
Each press changes the DSP mode as follows:
HALL 1 HALL 2 JAZZ DANCE
5/7CH STEREO THEATER 2 THEATER 1
•For STEREO \Press STEREO (STEREO/DIRECT) Each press changes the STEREO mode as follows:
STEREO DIRECT
memo • If you have SURROUND BACK speakers switched
| on (see | |
| STEREO will appear as such in the display on the | |
| receiver. If these speakers are not switched on the | |
| above two modes will appear as | |
| 5CH STEREO. | |
| • The effects of ADVANCED THEATER mode can be | |
| adjusted in the range of 10 to 90 by pressing | |
| EFFECT +/– (The default setting is 70). Also, the | |
| effect level can be set in each ADVANCED THE- | |
| ATER mode by pressing the | |
| • The amount of effect of each DSP mode can be | |
46 | adjusted in the range of 10 to 90 (the default | |
setting value is 70) by pressing EFFECT | ||
| ||
| • 5/7CH STEREO modes cannot be changed. |