Pioneer VSX-39TX manual Press the Channel Level button, Test Tone

Initial Set Up

CHANNEL LEVEL

The following steps show you how to balance the sound output level of your speakers. Proper speaker balance is essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.32) first.

	System Setup	BACK
	DIGITAL INPUT	MULTI ROOM
	SELECT
1	SPEAKER	CROSSOVER
	SETTING	NETWORK
	CHANNEL DELAY	BASS PEAK LEVEL
		MANAGER
	CHANNEL LEVEL	DYNAMIC RANGE
		CONTROL

1Press the CHANNEL LEVEL button.

The CHANNEL LEVEL settings will appear on your remote control screen.

NOTE : Be prepared! The test tone is output at a high volume level.

MASTER VOLUME rotates to the reference position (0 dB) and the display on the receiver flashes TEST TONE. After a few seconds the test tone is output.

These settings will be displayed on your TV.

2Select a test tone mode by pressing one of the TEST TONE buttons. Output the

TEST TONE.

SIGNAL		STEREO	VOLUME
SELECT		A
	SP
ANALOG			dB
AUTO

2

AUTO (automatic TEST TONE)

This mode switches the test tone between each speaker automatically. The automatic test tone is output in the following order :

FL CT FR SR

SW SL SBL SBR

MANUAL (manual TEST TONE)

This mode lets you switch the test tone between each speaker manually.

FL		CT		FR
	0.0 dB		0.0 dB	0.0 dB
SL		SW		SR
	0.0 dB		0.0 dB	0.0 dB
SBL 0.0 dB			SBR	0.0 dB

SET UP

Any time you want to exit the process

Press SETUP OK.

memo	• Be careful, if you touch one of the speaker buttons
	by accident the TEST TONE will automatically sound
	from each speaker.

•If your subwoofer has a volume control, set it to the middle position before doing these operations.

•A test tone will be output from the SURROUND BACK speakers but your external amplifier must be turned up at least a little in order to hear it. Be careful that it is not turned up too much because the test tone vol- ume is quite loud.

37