Using Other Functions
Using the front panel with the MULTI-ROOM system
1 | Press the MULTI ROOM & SOURCE |
1 2,4,5 3,4,5 | button. |
& SOURCE
CONTROL
TUNER | PHONO |
TUNER CONTROL | |
FM/AM | - TUNING + |
MEMRY | - STATION + |
INPUT
SELECTOR
MASTER
VOLUME
MINMAX
The display shown below will illuminate when the receiver is in STANDBY mode.
Also, the MR&S button will light.
2Press the CONTROL button.
The light on the button will start to blink.
Ç
&SOURCE
CONTROL
memo If you don't turn the multi room function off you won't be able to turn the entire main room system off.
3Within ten seconds of step 2, select the FUNCTION with the INPUT
SELECTOR.
For this example we'll use the TUNER function. The display shown below will illuminate.
The INPUT SELECTOR steps through the functions in the following order:
DVD/LD TV/SAT CD
VCR 1 TUNER MD/TAPE 1
4Press the CONTROL button again and use the INPUT SELECTOR to adjust the VOLUME. The volume can be adjusted in a range of
to 0dB.
The display will appear as shown below.
5When in TUNER function, press the CONTROL button and use the INPUT SELECTOR to tune in the
station.
The display will appear as shown below.
OPERATION
Ç
Turn the input selector until you get:
81