Desa 107624-02, 107625-01, 107625-02, 11174-01 Chock, Chain, Switch, Bucking, Felling, Limbing, Kickback, Sprocket, Guide Bar, Power Head, Felling Cut, Rear Handle, Front Handle, Low-Kickback

UNPACKING

1. Remove all items from carton.

PRODUCT IDENTIFICATION

2.Check all items for any shipping damage. If you find any damage or if any parts are missing, call Technical Services at 1-800-858-8501 for prompt service.

Switch Lockout	Oil Cap	Oil Level Sight
		Front Handle with Hand Guard
Rear Handle
Power Cord
			Guide Bar Nose
		Saw Chain
Cord Hitch	Trigger	Chain Tensioning Screw	Guide Bar
Figure 2 - Chain Saw Model 107624-01, -02
Switch Lockout	Oil Cap	Oil Level Sight
		Front Handle with Hand Guard
Rear Handle
Power Cord			Guide Bar Nose
Cord Hitch		Saw Chain
	Trigger	Chain Tensioning Knob
			Guide Bar

Figure 3 - Chain Saw Model 107625-01, -02, 111174-01

CHAIN SAW NAMES AND TERMS

Bucking Process of cutting a felled tree or log into lengths.Chock Block or wedge used to secure wood from moving.Felling Process of cutting down a tree.

Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree from notching cut. Front Handle Located at front of saw body.

Front Hand Guard Shield between front handle and guide bar. Protects left hand while using saw. Guide Bar Metal bar that extends from saw body. The guide bar supports and guides chain.

Guide Bar Nose Tip or end of guide bar. Kickback Quick backward and upward motion of guide bar. Kickback may occur when tip of guide bar touches an object while chain is moving. The guide bar will kick up and back towards operator. Limbing Process of cutting limb(s) from a felled tree. Low-Kickback Chain Chain that reduces chance of kickback as required by ANSI B175.1.

Normal Cutting Position Stance used while making bucking and felling cuts.

Notching Cut Notch cut in tree that directs fall of tree. Oiler Control System for oiling guide bar and chain. Power Head Chain saw without chain and guide bar. Also known as saw body.

Pushback(Kickback,Pinch) Rapid pushback of chain saw. Pushback may occur if chain along top of guide bar is pinched, caught, or contacts a foreign object.

Rear Handle Handle located at rear of saw body. Reduced Kickback Guide Bar Guide bar that reduces chance of kickback.

Replacement Chain Chain that complies with ANSI B175.1 when used with a specific saw. It may not meet ANSI requirements when used with other saws.

Saw Chain (Chain) Loop of chain having cutting teeth for cutting wood. The motor drives chain. The guide bar supports chain.

Spiked Bumper (Spike) Pointed teeth at front of saw body beside guide bar. Keep spiked bumper in contact with wood when felling or bucking. It helps maintain position of saw while cutting.

Sprocket Toothed wheel that drives chain. Switch Device that completes or interrupts electrical circuit to motor of saw.

www.desatech.com 6 107705