Desa 5412 manual Operation, Model, Features, Requirements, Resets to Auto Mode at dawn

®

Motion Sensor Light Control

Model 5412

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Photocell keeps the lighting off during daylight hours.

•LED indicates motion was sensed (day or night).

This package includes:

Mounting Bolt

Plastic
Hanger	Rubber Plug

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	1, 5, or 10 Minutes		x
Manual	To Dawn*		x

* resets to Auto Mode at dawn.

Note: When fi rst turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put the ON-TIME switch on the bottom		ON-TIME
of the sensor in the TEST position.
		10 5 1 TEST
AUTO
Put the ON-TIME switch in the 1, 5,	ON-TIME
or 10 minute position.
	10 5 1 TEST
MANUAL MODE

Lamp Holders

2 Shells

Cover

Plate

Sensor Gasket

Light Control

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1 Second OFF

then...

Mounting Strap

2 Wire

Connectors

6 Screws

2 Flood Lamps(3 sizes included) (some versions)

Requirements

•The Light Control requires 120-volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

... back on.

	Mode Switching Summary
	TEST	Move ON-TIME Switch to
			1, 5, or 10 minutes
	AUTO
			Flip light switch off
			for one second then
			back on*
MANUAL MODE

*If you get confused while switching modes, turn the power off for one minute, then back on. After the cali- bration time the control will be in the AUTO mode.

© 2006 DESA Specialty Products™ 598-1273-00