CHANNEL SETTING
Your new TRINE wireless door chime uses a digital coding system to create eight selectable channels. It is not necessary to change the set- ting, since the wireless door chime is factory
However, if interference from other devices occurs or if you wish to match to other TRINE wireless door chimes, the channel must have the same settings to operate properly.
On the back of the chime you will find connectors numbered one through three. These are for your channel selections. Simply remove one or more connectors to set a new channel.
To change the push button security code, remove one or more of the connectors (1 through 3) on the push button. You must also remove the corresponding connectors on the chime receiver (also 1 through 3). If your chime receiver has more connectors (1 through 6), use only the first 3 (1 through 3). It does not matter which connector(s) you remove on the push button. Just be sure they have the same corresponding numbers as the connector(s) that you will remove from the receiver. If connector numbers do not match, your system will not work.
SUGGESTION: Begin by removing just one push button connec- tor and one matching chime connector. Test to see if this eliminated the false triggering problem. If false triggering still occurs, repeat process.
| ON/OFF | AUX. |
| OUTLET | |
1 | CONNECTORS |
|
2 |
| |
3 |
| 3 2 1 |
| VOLUME | |
|
| |
| CONTROL |
|
The push button enclosed is an eight (8) note Westminster push button which will give you 8 flashes combined with an
