INSTALLING TO WALL

Continued

4.For thin walls (1/2" or less), insert red key into wall anchor. Push red key to “pop” open anchor wings. IMPORTANT: Do not hammer key!

For thick walls (over 1/2" thick) or solid walls, do not pop open wings.

Figure 10 - Popping Open Anchor Wings For Thin Walls

5.Place mounting bracket onto wall. Line up last hole on each end of bracket with wall anchors.

6.Insert mounting screws through bracket and into wall anchors.

7.Tighten screws until mounting bracket is firmly fastened to wall.

Placing Heater On Mounting Bracket

1.Locate two horizontal slots on back panel of heater.

2.Place heater onto mounting bracket. Slide horizontal slots onto stand-out tabs on mounting bracket.

Stand-Out Tab

Horizontal Slots

Mounting Bracket (attached to wall)

Figure 11 - Mounting Heater Onto Mounting Bracket

Installing Bottom Mounting Screws

1.Locate two bottom mounting holes. These holes are near bottom on back panel of heater (see Figure 12).

2.Mark screw locations on wall.

3.Remove heater from mounting bracket.

4.If installing bottom mounting screws into hollow or solid wall, install wall anchors. Follow steps 1 through 4 under Attaching To Wall Anchor Method, page 12.

If installing bottom mounting screw into wall stud, drill holes at marked loca- tions using 9/64" drill bit.

5.Replace heater onto mounting bracket.

6.Place spacers between bottom mounting holes and wall anchor or drilled hole.

7.Hold spacer in place with one hand. With other hand, insert mounting screw through bottom mounting hole and spacer. Place tip of screw in opening of wall anchor or drilled hole.

8.Tighten both screws until heater is firmly secured to wall. Do not over tighten. Note: Do not replace front panel at this time. Replace front panel after making gas connections and checking for leaks (see pages 14-16).

Figure 12 - Installing Bottom Mounting Screws

099569

13

Page 13
Image 13
Desa A installation manual Placing Heater On Mounting Bracket, Installing Bottom Mounting Screws

A specifications

Desa A is a vibrant and innovative community that exemplifies the fusion of tradition and modernity. Nestled in a picturesque landscape, this village has become a model for sustainable living while preserving its rich cultural heritage. One of the main features of Desa A is its commitment to eco-friendly practices, making it a leader in environmental sustainability.

At the heart of Desa A is the utilization of renewable energy sources. The village has invested in solar panels and wind turbines, which provide clean energy to all households. This focus on renewable energy not only reduces carbon footprints but also lowers energy costs for residents. Additionally, the community has implemented a rainwater harvesting system, allowing them to efficiently manage water resources and reduce reliance on external water supplies.

Technology plays a pivotal role in the daily lives of Desa A's residents. The village is equipped with high-speed internet, fostering connectivity and enabling residents to access online resources for education and business. This technological infrastructure has empowered local entrepreneurs to tap into global markets, enhancing economic growth. Furthermore, smart farming techniques have been adopted, including precision agriculture and automated irrigation systems, which optimize crop yield and efficiency.

Desa A is also characterized by its strong sense of community and cultural preservation. The village hosts regular cultural festivals that celebrate traditional arts, music, and cuisine. These events not only foster a sense of belonging among residents but also attract visitors, promoting tourism in the area. The community centers serve as hubs for educational initiatives, where residents can learn about sustainable practices, handicrafts, and various skills.

Another notable aspect of Desa A is its commitment to health and wellness. The village has established health clinics that provide accessible medical care, and there are numerous outdoor spaces for exercise and recreation. These facilities encourage an active lifestyle among residents, promoting both physical and mental well-being.

In summary, Desa A is a remarkable example of a forward-thinking community that balances innovation with tradition. Its main features, including renewable energy initiatives, advanced technology integration, cultural preservation, and a focus on health, create an environment that is not only sustainable but also vibrant and welcoming. This unique blend of characteristics makes Desa A a model for other communities aiming to achieve a harmonious and prosperous future.