PRODUCT IDENTIFICATION

UNPACKING

ASSEMBLY

4

Hot Air Outlet

Upper Shell

Lower Shell

Motor and

 

Pump

 

Assembly

Fuel Cap

Thermostat

 

Power Cord

Flame-out Control

Fuel Tank

Reset Button

 

Figure 1 - B350CE Btu/Hr Model

1.Remove all protective packing applied to heater for shipment.

2.Remove heater from shipping container.

3.Check heater for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

This model is furnished with wheels and front and rear handles. Wheels, handles, and mounting hardware are found in the shipping carton.

TOOLS NEEDED

Pliers

Two - 7/16" Open or Adjustable Wrenches

1.Slide axle through wheel support frame. Install wheel spacer and then one flat washer on each end of axle.

2.Install wheels on axle.

IMPORTANT: When installing wheels, point exetended hub of wheels toward wheel support frame (see Figure 2, page 5).

3.Slide one flat washer on each axle end in front of wheel.

4.Install cotter pins through holes at each end of axle. Bend cotter pins with pliers to secure.

5.Place heater on wheel support frame. Make sure air inlet end (rear) of heater is over wheels. Line up holes on fuel tank flange with holes on wheel support frame.

6.Place front and rear handles on top of fuel tank flange. Insert screws through handles, fuel tank flange, and wheel support frame. Attach nut finger tight after inserting each screw.

7.After inserting all screws, tighten nuts firmly.

101964

Page 4
Image 4
Desa B350CE owner manual Unpacking Assembly, Tools Needed

B350CE specifications

The Desa B350CE is a highly regarded model that combines functionality, efficiency, and modern features, making it an attractive choice for professionals and hobbyists alike. This device is primarily recognized for its innovative approach to comfort and sustainability, positioning itself as a versatile option in its category.

One of the standout features of the Desa B350CE is its advanced heating technology. The model employs a state-of-the-art combustion system, allowing for efficient fuel consumption while delivering powerful heating output. This aspect is particularly appreciated in colder climates, where maintaining a consistent and comfortable temperature is vital. The B350CE is capable of quickly heating spaces, making it suitable for various applications, including workshops and residential settings.

The Desa B350CE also includes smart controls that enhance user experience. With an intuitive interface, it allows users to easily adjust settings and monitor performance, ensuring optimal operation. These controls support temperature regulation, enabling users to maintain their desired comfort levels with minimal effort. Furthermore, its programmable timer function adds a layer of convenience, allowing for pre-scheduled heating cycles.

Another significant characteristic of the Desa B350CE is its focus on safety. It incorporates multiple safety features such as overheat protection and automatic shut-off capabilities. These features are designed to prevent accidents and offer peace of mind, especially in busy environments where oversight is common. The robust build quality of the unit ensures longevity, further emphasizing its reliability for long-term use.

The energy efficiency of the Desa B350CE cannot be overlooked. It is designed to operate efficiently, reducing fuel consumption and lowering operational costs. As users become more environmentally conscious, this model aligns with sustainability goals by providing effective heating solutions while minimizing its carbon footprint.

In summary, the Desa B350CE stands out in the market with its powerful performance, user-friendly controls, and commitment to safety and efficiency. With its innovative features, it caters to a wide range of heating needs, making it a worthwhile investment for anyone seeking effective and reliable heating solutions. This combination of technology and practical design makes the Desa B350CE a leader in its class.