CLEANING AND

MAINTENANCE

Continued

Replacing Log Set Ember Bed Bulbs

1.Carefully remove mirror from unit by lift- ing it gently from the stove. Store in a safe place or lay it face down on the carpet.

2.From the bottom, lift up the log set ember bed and remove it from the unit (do not pull up on logs).

3.Remove spring clip from bulb. Hold socket and pull out old bulb.

4.Hold socket and push in new bulb. Replace spring clip.

5.Repeat steps 2 and 3 for the second bulb.

 

Bulb with

Bulb with

Spring Clip

 

Spring Clip

 

Log Grate

Figure 7 - Ember Bed Bulb Replacement

(Looking in from Top of Unit)

Replacing Flame Generation Bulbs

1.Unscrew the 6 screws from back of stove shown in Figure 8. Remove metal plate.

AVOID STRESS TO THE WIRES.

 

Grounding

 

Connecting Screw

Screws

Screws

Screws

Figure 8 - Locating Flame Generation

Cylinder

2.Locate the flame generation cylindrical drum. It is constructed of two removable halves; ei- ther of which can be removed from the unit.

2.Squeeze half of drum cylinder until it's top edge clears the top drum track. Remove bot- tom edge of cylinder drum from bottom drum track. This will give you access to the light bulbs. Note: Do not exert excessive pressure on drum cylinder as this may cause damage.

3.Remove spring clip. Hold socket and pull out old bulb.

4.Hold socket and push in new bulb (DO NOT exceed wattage). Replace spring clip.

5.Repeat steps 5 and 6 for second bulb.

6.Insert bottom edge of removed cylinder half into bottom drum track. Gently squeeze drum cylin- der until it's top edge fits into top drum rack.

7.Replace the metal plate with screws.

8.Replace the log set ember bed.

9.Replace the mirror. Note: Before replacing, clean mirror of any dust or fingerprints. Make sure the mirror side is toward the front of the unit.

10.Replace the top contrasting light housing. Note: The contrasting light should be placed at the mid point of the mirror edge.

11.Replace the metal plate and 4 screws. Replace the top of the unit by sliding the top forward until the clips reconnect.

12.Secure the top to the back frame by reattach- ing screws.

Flame Cylinder Drum

Figure 9 - Flame Generation Cylinder Drum

117190-01A

www.desatech.com

7

Page 7
Image 7
Desa CGESBL operation manual Replacing Log Set Ember Bed Bulbs, Replacing Flame Generation Bulbs

CGESBL specifications

Desa CGESBL, which stands for the Center for Green Energy and Smart Building, represents a pioneering initiative aimed at revolutionizing the residential and commercial construction sectors through sustainable design and cutting-edge technology. Located in a rapidly evolving urban landscape, Desa CGESBL integrates ecological principles with smart technological advancements to create a holistic environment that caters to both human needs and the planet's well-being.

One of the main features of Desa CGESBL is its commitment to sustainability. The development utilizes renewable energy sources, including solar panels and wind turbines, which significantly reduce reliance on fossil fuels. The buildings are constructed using environmentally friendly materials, such as recycled steel and low-emission concrete, ensuring that the ecological footprint is minimized from the initial construction phase to the eventual occupancy.

Another characteristic that sets Desa CGESBL apart is its integration of smart technologies. Each unit comes equipped with smart home systems that allow residents to control heating, lighting, and security through mobile applications. These systems are not only user-friendly but also energy-efficient, promoting the effective use of resources while maintaining comfort. Furthermore, smart sensors are installed throughout the buildings to monitor environmental conditions, enabling real-time adjustments that enhance energy efficiency while ensuring optimal indoor air quality.

The architectural design of Desa CGESBL promotes not only aesthetic appeal but also functional living. The layout encourages community interaction, featuring shared green spaces, gardens, and recreational areas that foster a sense of belonging among residents. These communal areas not only enhance the social fabric of the community but also contribute to biodiversity by providing habitats for local flora and fauna.

In addition to its physical attributes, Desa CGESBL champions a forward-thinking approach to urban living. The development promotes car-free living through the provision of extensive pedestrian pathways and cycling routes, encouraging healthier lifestyles while reducing traffic congestion. Electric vehicle charging stations are strategically placed to support residents who opt for electric transportation, further emphasizing the commitment to sustainability.

In conclusion, Desa CGESBL stands as a model for future urban developments, combining sustainable practices, smart technologies, and community-focused design. Its innovative features and environmentally conscious approach set a benchmark for creating spaces that are not only livable but also harmoniously integrated with the natural world. As cities move toward more sustainable futures, Desa CGESBL exemplifies how thoughtful design and technology can create healthier environments for all.