INSTALLING TO WALL

Continued

4.For thin walls (1/2" or less), insert red key into wall anchor. Push red key to “pop” open anchor wings. IMPORTANT: Do not hammer key!

For thick walls (over 1/2" thick) or solid walls, do not pop open wings.

Figure 9 - Popping Open Anchor Wings For Thin Walls

5.Place mounting bracket onto wall. Line up last hole on each end of bracket with wall anchors.

6.Insert mounting screws through bracket and into wall anchors.

7.Tighten screws until mounting bracket is firmly fastened to wall.

Placing Heater On Mounting Bracket

1.Locate two horizontal slots on back panel of heater.

2.Place heater onto mounting bracket. Slide horizontal slots onto stand-out tabs on mounting bracket.

Stand-Out Tab

Horizontal Slots

Mounting Bracket (attached to wall)

Figure 10 - Mounting Heater Onto Mounting Bracket

Installing Bottom Mounting Screws

1.Locate two bottom mounting holes. These holes are near bottom on back panel of heater (see Figure 11).

2.Mark screw locations on wall.

3.Remove heater from mounting bracket.

4.If installing bottom mounting screws into hollow or solid wall, install wall anchors. Follow steps 1 through 4 under Attaching To Wall Anchor Method, page 12.

If installing bottom mounting screw into wall stud, drill holes at marked loca- tions using 9/64" drill bit.

5.Replace heater onto mounting bracket.

6.Place spacers between bottom mounting holes and wall anchor or drilled hole.

7.Hold spacer in place with one hand. With other hand, insert mounting screw through bottom mounting hole and spacer. Place tip of screw in opening of wall anchor or drilled hole.

8.Tighten both screws until heater is firmly secured to wall. Do not over tighten. Note: Do not replace front panel at this time. Replace front panel after making

gas connections and checking for leaks (see pages 14-16).

Figure 11 - Installing Bottom Mounting Screws

101805

13

Page 12 Page 14
Page 13
Image 13
Desa RP30C, CGP18C installation manual Placing Heater On Mounting Bracket, Installing Bottom Mounting Screws
Page 12 Page 14

RP30C, CGP18C specifications

Desa RP30C and CGP18C are two innovative models in the range of residential heat and air solutions designed to enhance home comfort while promoting energy efficiency. Both units stand out due to their advanced features, reliable technology, and user-friendly characteristics.

The Desa RP30C is a powerful, high-efficiency propane heater that delivers exceptional warmth and comfort. It is designed for spaces up to 1,000 square feet, making it suitable for various applications, including homes, workshops, and garages. This heater operates quietly and has an adjustable thermostat that allows users to maintain their desired temperature easily. The RP30C features a durable construction, with a robust chassis and a sleek design that integrates well into different settings.

One of the main highlights of the RP30C is its safety features, which include an automatic shut-off mechanism in case of overheating, ensuring user peace of mind. Additionally, it utilizes a catalytic combustion process that not only maximizes heat production but also minimizes pollutant emissions, making it an environmentally responsible choice.

On the other hand, the CGP18C is a portable gas-powered generator designed for convenience and reliability during power outages or outdoor activities. With an 18,000-watt peak output, this generator can power multiple appliances efficiently. It is built to withstand various environmental conditions, featuring a weather-resistant casing and solid wheels for easy mobility.

The CGP18C employs advanced inverter technology that ensures clean and stable power, making it safe for sensitive devices such as computers and medical equipment. Its user-friendly control panel simplifies operation, while a built-in fuel gauge allows users to monitor their remaining fuel levels effectively. Moreover, the generator is equipped with multiple outlet options, accommodating various plug types to meet diverse power needs.

Both the Desa RP30C and CGP18C exemplify modern engineering, combining functionality, efficiency, and ease of use. They are ideal for anyone seeking effective heating solutions or dependable power generation, making them essential additions for home and outdoor use. With these products, users can enjoy enhanced comfort and reliability in their daily lives.
Top Page Image Contents