Desa CVSR18 Hearth KIT Assembly and Installation, Kit Assembly, Installation and Gas Connection

Models: CPVSR18 and CVDR30 CPVSR24 CVSR24 CVDR24 CVDR18 CVSR18

1 24
Download 24 pages 52.46 Kb
Page 9
Image 9

OWNER’S MANUAL

INSTALLATION

Continued

Test Pressures Equal To or Less Than 1/2 PSIG

1.Close manual shutoff valve (see Fig- ure 7).

2.Pressurize supply piping system by either using compressed air or opening main gas valve located on or near gas meter.

3.Check all joints from gas meter to manual shutoff valve (see Figure 7). Apply mix- ture of liquid soap and water to gas joints. Bubbles forming show a leak.

4.Correct all leaks at once.

Manual Shutoff Valve

Gas Meter

Figure 7 - Checking Gas Joints

HEARTH KIT ASSEMBLY AND INSTALLATION

Kit Assembly

Note: The following instructions apply to both standard single bar burners, as well as dual flame “U” style burners. Be sure all pipe threaded connections are tight, and have thread compound to prevent leaks.

1.Determine which side the gas line will be coming into the fireplace.

2.Using a hammer and screw driver, re- move knock-out plug from the side of the pan that corresponds to the gas line (see Figure 8).

Knock-Out Plugs

Burner Pan

Assembly (Facing

Front of Fireplace)

Figure 8 - Knock-Out Plug Locations

3.Unscrew burner inlet fitting from burner manifold (see Figure 9).

4.Place burner manifold in pan with threaded opening facing open knock- out plug.

5.Using thread sealant (resistant to the action of propane/LP gas) on larger end of fitting, screw the burner inlet fitting through hole and into burner manifold. Tighten using a wrench. If using propane/LP gas, see Propane/LP Gas Conversion, page 10.

6.Using burner clamp, screw, and nut pro- vided, assemble clamp to pan (“U” style burners only). This will hold the burner manifold in place.

7.If using optional GA9050 series kit, go to Optional GA9050 Series On/Off Safety Valve/Pilot Kit section for installation in- structions. If using optional GA9150 se- ries kit, follow instructions included with kit for installation and operation.

Nut

Burner

Manifold

Burner

Clamp

Burner

Pan

Screw

Burner Inlet

 

 

Fitting

Figure 9 - Installing Burner

Installation and Gas Connection

1.Place the burner pan assembly in the center of the fireplace floor. Make sure the front of pan faces forward.

2.Thread the gas supply fitting to the fireplace gas supply pipe. Use thread sealant.

3.Install adapter fitting onto the burner inlet fitting using thread sealant on male threads of burner inlet fitting (see Figure 10).

4.Install the gas connector tube to the gas supply fitting. Carefully shape tube to attach to adapter fitting.

Gas Connector

Tube

Burner Pan

Adapter

Assembly (Facing

Fitting

Front of Fireplace)

 

Figure 10 - Connecting Gas to Appliance

OPTIONAL GA9050 SERIES ON/OFF SAFETY VALVE/ PILOT KIT ASSEMBLY

For additional convenience and safety, or for propane/LP conversion, an optional ON/ OFF safety valve/pilot kit is available. See Accessories, page 20.

WARNING: You must use a ON/OFF safety valve/pilot kit for propane/LP conversion.

Natural Gas Installation

1.Thread the gas control valve onto the burner inlet fitting (see Figure 11). Use thread sealant on the male threads of the burner inlet fitting. Hold the burner inlet fitting with a wrench to prevent overtightening the connection to the burner. Make sure the control rod is facing the front (see Figure 11).

Gas

Control

Valve

Burner Pan

 

 

Assembly

Burner Inlet

 

 

 

 

Fitting

Control Rod

 

 

Figure 11 - Installing Gas Control Valve

Continued

901048

9

Page 9
Image 9
Desa CVSR18 Hearth KIT Assembly and Installation, Kit Assembly, Installation and Gas Connection, Natural Gas Installation

CPVSR18, and CVDR30, CPVSR24, CVSR24, CVDR24 specifications

Desa CVSR18, CVDR18, CVDR24, CVSR24, and CPVSR24 are a range of advanced heating solutions designed for various industrial and commercial applications. These systems combine a sophisticated blend of technology, efficiency, and ease of use, making them ideal for maintaining optimal thermal comfort.

The CVSR and CVDR series feature a unique vertical design that maximizes space efficiency while ensuring powerful heating capabilities. The model names indicate their heating capacities, with CVSR18 and CVDR18 offering output ratings of 18 kW, and the CVDR24 and CVSR24 providing a robust 24 kW. This scalability makes them suitable for a wide variety of environments, from large warehouses to smaller industrial facilities.

One of the key characteristics of these units is their high efficiency. Employing advanced combustion technology, the Desa heating systems reduce energy consumption while delivering superior heating performance. This not only translates to lower operational costs but also contributes to a reduced environmental footprint, aligning with contemporary sustainability goals.

The CVSR series utilizes a sealed combustion design, meaning that air is drawn from outside the building for combustion, improving indoor air quality and comfort. Meanwhile, the CVDR variants are designed for direct vent applications, allowing for flexible installation options. The direct vent feature ensures that exhaust gases are effectively expelled outside without interfering with indoor air circulation.

In addition to their energy efficiency and innovative design, the CPVSR24 model stands out due to its enhanced control capabilities. It includes smart technology integration that allows for remote monitoring and management, offering users greater control over their heating systems. This feature is particularly beneficial for businesses seeking to optimize operational efficiency by adjusting heating output based on real-time conditions.

Another notable aspect of these models is their durability. Constructed with robust materials, the Desa models are designed to withstand harsh operating conditions. Regular maintenance is made straightforward, ensuring longevity and reliability in performance.

Overall, Desa CVSR18, CVDR18, CVDR24, CVSR24, and CPVSR24 represent a comprehensive suite of heating solutions that prioritize performance, convenience, and sustainability. Their innovative features make them a strategic choice for those looking to enhance their heating systems while minimizing energy consumption and environmental impact.