TROUBLESHOOTING
Continued
WARNING: If you smell gas
•Shut off gas supply.
•Do not try to light any appliance.
•Do not touch any electrical switch; do not use any phone in your building.
•Immediately call your gas supplier from a neighbor’s phone. Fol- low the gas supplier’s instructions.
•If you cannot reach your gas supplier, call the fire department.
IMPORTANT: Operating heater where impurities in air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors.
OBSERVED PROBLEM | POSSIBLE CAUSE | REMEDY | ||
|
|
|
|
|
White powder residue forming | 1. | When heated, vapors from | 1. | Turn heater off when using |
within burner box or on adjacent |
| furniture polish, wax, carpet |
| furniture polish, wax, carpet |
walls or furniture |
| cleaner, etc., may turn into |
| cleaners or similar products |
|
| white powder residue |
|
|
|
|
|
|
|
Heater produces unwanted | 1. | Heater burning vapors from | 1. | Ventilate room. Stop using |
odors |
| paint, hair spray, glues, etc. See |
| odor causing products while |
|
| IMPORTANT statement above |
| heater is running |
| 2. | Low fuel supply (propane/LP | 2. | Refill supply tank |
|
| gas) | 3. | Locate and correct all leaks |
| 3. | Gas leak. See Warning | ||
|
| statement at top of page |
| (see Checking Gas Connec- |
|
|
|
| tions, page 12) |
|
|
|
|
|
Heater shuts off in use (ODS | 1. | Not enough fresh air is | 1. | Open window and/or door for |
operates) |
| available |
| ventilation |
| 2. | Low line pressure | 2. | Contact local natural or pro- |
|
|
|
| pane/LP gas company |
| 3. | ODS/pilot is partially clogged | 3. | Clean ODS/pilot (see Cleaning |
|
|
|
| and Maintenance, page 18) |
|
|
|
|
|
Gas odor even when control | 1. | Gas leak. See Warning | 1. | Locate and correct all leaks |
knob is in OFF position |
| statement at top of page |
| (see Checking Gas Connec- |
| 2. | Control valve defective |
| tions, page 12) |
| 2. | Replace control valve | ||
Gas odor during combustion | 1. | Foreign matter between con- |
|
| trol valve and burner |
| 2. | Gas leak. See Warning |
|
| statement at top of page |
1.Take apart gas tubing and remove foreign matter
2.Locate and correct all leaks (see Checking Gas Connec- tions, page 12)
Moisture/condensation noticed | 1. Not enough combustion/ven- | 1. Refer to Fresh Air for Com- |
on windows | tilation air | bustion and Ventilation re- |
|
| quirements (page 5) |
www.desatech.com | 21 |
