DYNAVENT®

DIRECT-VENT PROPANE/LP GAS HEATER

OPERATING

FURNACE

WARNING: Furnace burner, combustion chamber, and ex- haust port are very hot during operation. Keep children and adults away from hot surfaces to avoid burns and clothing igni- tion. Carefully supervise young children when they are in the same room as furnace. Furnace will remain hot for a time after shutdown. Let surface cool be- fore touching.

WARNING: Do not operate furnace with front cover removed. Unsafe operation could result.

CAUTION: Do not block cir- culating air openings in the lou- ver of the front cover. This is necessary for furnace to operate properly.

NOTICE: If operating furnace for the first time, a slight odor will occur. This odor will go away after a few hours of operation.

FOR YOUR SAFETY

READ BEFORE

LIGHTING

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result caus- ing property damage, personal injury, or loss of life.

A.This appliance does not have a pilot. It is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

B.BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electric switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas sup- plier, call the fire department.

C.Use only your hand to turn the handle on the equipment shutoff valve. Never use tools. If the handle will not turn by hand, don’t try to repair it. Call a qualified service tech- nician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been un- der water.

OPERATING

INSTRUCTIONS

WARNING: Always follow lighting instructions. Never at- tempt to light burner with a match or butane torch.

1.STOP! Read the safety information, column 1.

2.Set the thermostat to lowest setting.

3.Turn off all electric power to the furnace.

4.Turn equipment shutoff valve clock-

wise to OFF position (see Figure 18).

5.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety in- formation, column 1. If you don’t smell gas, go to next step.

6.Turn equipment shutoff valve coun-

terclockwise to ON position (see Figure 18).

7.This furnace is equipped with an ig- nition device which automatically lights the burner. Do not try to light the burner by hand.

8.Plug in furnace.

9.Set thermostat to desired setting. If thermostat is set above room tem- perature, the blower will come on.

10.Allow approximately 45 seconds for ignition to occur. When ignition oc- curs, the glo-bar will stay on for a short period of time. The flame sens- ing probe will sense the burner flame and shut off glo-bar.

If ignition does not occur within 22 seconds, the ignition control will at- tempt to light burner three times. This will take about two minutes. If igni- tion does not occur, the ignition con- trol will lock out the glo-bar and valve circuit. Air in the gas line or a short gas interruption will prevent furnace from igniting. If this happens, turn thermostat off and wait 5 minutes. Turn the thermostat back on. The fur- nace will try to ignite again.

11.If the furnace still does not ignite, fol- low instructions To Turn Off Gas to Furnace, page 13. Call a qualified service person. Do not attempt to re- start furnace.

On Position

Off Position

Figure 18 - Equipment Shutoff Valve

12

201839

Page 12
Image 12
Desa DNV25PB, DNV40PB installation manual Operating Furnace, For Your Safety Read Before Lighting, Operating Instructions

DNV40PB, DNV25PB specifications

Desa DNV25PB and DNV40PB are two advanced models in the range of DNV portable heaters renowned for their efficiency and innovative technology. These heaters are designed to provide reliable and effective heating solutions for various applications, from industrial settings to outdoor events.

One of the standout features of the DNV25PB and DNV40PB models is their robust construction, making them suitable for rigorous work environments. Both models are built with high-quality materials that ensure durability and resilience even in challenging conditions. This makes them an ideal choice for industries such as construction, warehouses, and agriculture, where reliable heating is essential.

The performance of the DNV heaters is enhanced by their powerful heating capacity. The DNV25PB model can deliver an impressive output of 25 kW, while the DNV40PB model boasts a strong 40 kW output. This substantial heating capability allows them to heat large spaces quickly and efficiently, providing comfort in less time and reducing energy costs. Additionally, both models come equipped with adjustable heating settings, allowing users to tailor the output to meet their specific needs.

These heaters incorporate advanced technologies that prioritize energy efficiency and safety. They are designed with smart control systems that monitor and adjust the heater's operation, optimizing fuel consumption while delivering consistent heat. Furthermore, safety features such as automatic shut-off mechanisms and overheating protection devices are integrated into both models, ensuring safe operation even in extended use.

Portability is another significant characteristic of the DNV25PB and DNV40PB models. Their compact design, coupled with built-in handles and wheels, allows for easy transport between different sites, making them highly versatile. Users can effortlessly relocate the heaters to adapt to changing conditions or requirements, enhancing their practicality.

In summary, the Desa DNV25PB and DNV40PB portable heaters are characterized by their powerful heating capabilities, robust construction, energy efficiency, and safety features. They are well-suited for various industrial and outdoor applications, offering flexibility and reliable performance. With their innovative technology and thoughtful design, these models stand out in the market, providing effective heating solutions to meet diverse needs. Whether for temporary heating at a construction site or providing warmth for outdoor gatherings, the DNV series offers dependable performance tailored to user requirements.