BLUE FLAME PROPANE/LP GAS HEATER

INSTALLATION

Continued

INSTALLING HEATER TO WALL

Mounting Bracket

The mounting bracket is located on back panel of heater. It has been taped there for shipping. Remove mounting bracket from back panel.

Mounting

Bracket

Figure 5 - Mounting Bracket

INSTALLING THERMOSTAT SENSING BULB

Remove clip and bulb from shipping loca- tion. Place clip and bulb into operation loca- tion (see Figure 6)

Figure 6 - Moving Thermostat Sensing Bulb

Removing Front Panel Of Heater

1.Remove two screws near bottom cor- ners of front panel.

2.Lift straight up on grill guard until it stops. Grill guard will slide up about 1/4".

3.Pull bottom of front panel forward, then down.

4.Remove cardboard packing from grill and glass.

Figure 7 - Removing Front Panel Of Heater

Methods For Attaching Mounting Bracket To Wall

Only use last hole on each end of mounting bracket to attach bracket to wall. These two holes are 16 inches apart from their centers. Attach mounting bracket to wall in one of two ways:

1.Attaching to wall stud

2.Attaching to wall anchor

Attaching To Wall Stud: This method pro- vides the strongest hold. Insert mounting screws through mounting bracket and into wall studs.

Attaching To Wall Anchor: This method allows you to attach mounting bracket to hollow walls (wall areas between studs) or to solid walls (concrete or masonry).

Decide which method better suits your needs. Either method will provide a secure hold for the mounting bracket.

Marking Screw Locations

1.Tape mounting bracket to wall where heater will be located. Make sure mounting bracket is level.

WARNING: Maintain minimum clearances shown in Figure 7. If you can, provide greater clear- ances from floor and joining wall.

2.Mark screw locations on wall (see Fig- ure 8).

Note: Only mark last hole on each end of mounting bracket. Insert mounting screws through these holes only.

3.Remove tape and mounting bracket from wall.

10 1/4"

 

17 3/8"

 

Min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AdjoiningWall

33"

Only Insert Mounting

Screws Through Last

Min.

Hole On Each End

 

Floor

Figure 8 - Mounting Bracket Clearances

8

107341

Page 8
Image 8
Desa FGHS30LPB installation manual Installing Heater to Wall, Installing Thermostat Sensing Bulb

FGHS30LPB specifications

The Desa FGHS30LPB is a premium gas fireplace heater that combines style, efficiency, and modern technology to create a cozy and inviting atmosphere in any space. Designed with the contemporary homeowner in mind, this fireplace unit offers a unique blend of functionality and aesthetic appeal.

One of the standout features of the FGHS30LPB is its heating capacity. With a powerful output of up to 30,000 BTUs, this gas heater is capable of warming an area of approximately 1,200 square feet. This makes it an ideal choice for both large rooms and open-concept living spaces, ensuring that comfort is always within reach, even on the coldest days.

The FGHS30LPB showcases a sleek glass front that enhances its modern design while allowing for an unobstructed view of the beautiful flames. This glass is not only visually appealing but also contributes to the unit's efficient heating performance. The large viewing area allows for maximum heat transfer and real-time enjoyment of the dancing flames, making it the perfect focal point in any room.

Another key characteristic of the FGHS30LPB is its ceramic fiber logs, which mimic the look of real wood, providing an authentic fireplace experience without the hassle of traditional wood-burning stoves. Complemented by realistic glowing embers, this design results in a visually stunning display that brings warmth and charm to any interior space.

Technologically, the FGHS30LPB excels with its electronic ignition system. This feature allows for easy start-up with the simple push of a button, eliminating the need for matches or lighters. In addition, the unit is equipped with a built-in thermostat control that helps maintain the desired temperature, ensuring consistent comfort while optimizing fuel consumption.

Safety is also a priority for the FGHS30LPB, which includes features such as automatic shut-off and a protective screen. These aspects ensure that users can enjoy the warmth and ambiance of the fireplace without concern.

Overall, the Desa FGHS30LPB is an exceptional choice for anyone seeking an efficient and stylish gas fireplace heater. With its impressive heating capabilities, realistic flame appearance, and modern technology, it is designed to enhance both comfort and aesthetics in your home. Whether for daily use or special occasions, this fireplace unit offers a blend of performance and elegance, making it an outstanding addition to any household.