7. Locate upper and lower foot rail brackets. | 11. Connect regulator to gas cylinder. Gas cylinder will set inside of |
| cabinet assembly. |
Lower Foot
Rail Brackets
Upper Foot
Rail Brackets
8.Position upper and lower foot rail brackets as shown. Fasten to pillar using 2 screws (A) for each pillar.
9.Slide foot rail down over heater assembly. Position foot rail as shown, and fasten to brackets with 1 bolt (B) and 1 nut (C) for each pillar.
Foot Rail
Upper
Foot Rail
Bracket
Bolt (B)
Nut (C)
Lower Foot
Rail Bracket
Pillar
10.Slide top assembly into position as shown, making sure that grate tabs engage slots on underside of reflector. Fasten in place with
1 screw (A) through each pillar.
Top Assembly
Fasten with
Screw (A)
Pillar
12.Check for leaks. See Checking for Leaks in your owner's manual.
13.Hang table door panel from slots in burner support plate to cover inside of heater.
www.desatech.com |
