PRODUCT IDENTIFICATION
UNPACKING
THEORY OF
OPERATION
4
Hot Air Outlet | Handle |
| Upper Shell |
Lower Shell | Fan Guard |
| |
| Air Filter |
Fuel Tank | End Cover |
| |
| Fuel Cap |
Side Cover |
|
Ignition Control Assembly
(assembly on inside of
side cover)
Power Cord
Figure 1 - 50,000 Btu/Hr Model
1.Remove all packing items applied to heater for shipment.
2.Remove all items from carton.
3.Check items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.
The Fuel System: The air pump forces air through the air line. The air is then pushed through the nozzle. This air causes fuel to lift from the tank. A fine mist of fuel is sprayed into the combustion chamber.
The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air.
The Ignition System: The ignition control assembly provides power to the ignitor. This ignites the fuel/air mixture in the combustion chamber.
The
| Combustion Chamber | Motor | Air Pump | |
|
| Ignitor | Fan | Air Intake |
|
|
| Filter | |
|
|
|
| |
Clean |
|
|
| Cool |
Heated |
|
|
| Air |
Air Out |
|
|
| In |
|
|
|
| Air |
|
|
|
| Output |
|
|
|
| Filter |
Fuel | Nozzle | Fuel | Air Line | Ignition Control |
Tank |
| Filter | To Burner | Assembly |
| Air For Fuel |
| Air For Combustion | Fuel |
| System |
| And Heating |
|
Figure 2 - Cross Section Operational View
102553
