100,000 Btu/Hr

PROPANE CONSTRUCTION HEATER

PROPANE SUPPLY

Propane gas and propane tank(s) are to be furnished by the user.

Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58 and the Propane Installation Code CAN/ CGA B149.2. Your local library or fire de- partment will have this booklet.

The amount of propane gas ready for use from propane tanks varies. Two factors de- cide this amount:

1.The amount of propane gas in tank(s)

2.The temperature of tank(s)

The chart below shows the number of 100 pound tanks needed to run this heater.

Temperature(°F)

Number of tanks,

at Tank

100,000 Btu/Hr

32°

2

20°

2

10°

3

0°

3

-10°

(Use larger tank)

-20°

(Use larger tank)

Less gas is vaporized at lower temperatures. You may need two or more 100 pound tanks or one larger tank in colder weather. Your local propane gas dealer will help you select the proper supply system. The minimum surrounding air temperature rating for each heater is -20°F (-29°C).

INSTALLATION

WARNING: Review and un- derstand the warnings in the Safety Information section, page

2.They are needed to safely op- erate this heater. Follow all local codes when using this heater.

WARNING: Test all gas pip- ing and connections for leaks after installing or servicing. Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

1.Provide propane supply system (see Propane Supply above).

2.Connect fuel gas connector fitting on hose/regulator assembly to propane tank(s). Turn counterclockwise into threads on tank valve. Tighten firmly using wrench. IMPORTANT: Tighten regulator with vent pointing down. Pointing vent down protects regulator from weather damage.

Supply

 

Valve

Hose

 

Regulator

Propane

Vent

Tank

(pointing

 

 

down)

 

Fuel Gas

 

Connector

Figure 3 - Regulator With Vent Pointing Down

3.Connect hose to inlet connector. Tighten firmly using a wrench.

IMPORTANT: Extra hose or piping may be used if needed. Install extra hose or piping between hose/regulator assembly and propane tank. You must use the regulator supplied with heater.

4.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess-flow check valve on propane tank will stop gas flow. If this happens, close propane supply valve and open again slowly.

5.Check all connections for leaks.

6.Close propane supply valve.

100,000 Btu/Hr

Model Shown

Inlet

Hose

Connector

Figure 4 - Hose and Inlet Connector

VENTILATION

WARNING: Follow the mini- mum fresh, outside air ventila- tion requirements. If proper fresh, outside air ventilation is not pro- vided, carbon monoxide poison- ing can occur. Provide proper fresh, outside air ventilation be- fore running heater.

Provide a fresh air opening of at least three square feet for each 100,000 Btu/Hr rating. Provide extra fresh air if more heaters are being used.

4

105342

Page 4
Image 4
Desa RM100LP owner manual Propane Supply, Installation, Ventilation

RM100LP specifications

Desa RM100LP is an innovative residential development designed to cater to modern living needs while maintaining affordability. Located strategically within a growing urban area, the project is gaining attention for its unique blend of contemporary design and practical functionality.

One of the main features of Desa RM100LP is its commitment to offering quality living spaces at an accessible price point. The development includes a variety of unit sizes and layouts, ranging from cozy apartments to spacious family homes, ensuring that there is something for everyone. The homes are designed with an emphasis on open spaces and natural light, creating a warm and inviting atmosphere for residents.

Technologically, Desa RM100LP incorporates smart home features that enhance the living experience. Residents can enjoy the convenience of smart lighting, energy-efficient appliances, and advanced security systems all integrated into their homes. These technologies not only increase comfort but also promote sustainability and reduce energy costs, aligning with modern eco-friendly standards.

Sustainability is a key characteristic of the Desa RM100LP project. The development boasts green spaces, community gardens, and recreational areas that encourage outdoor activities and social interaction among residents. The use of sustainable building materials further emphasizes the commitment to environmental responsibility, ensuring that the development has a minimal ecological footprint.

Accessibility is another vital aspect of Desa RM100LP. The project's location is strategically chosen to be close to essential amenities such as schools, shopping centers, and healthcare facilities. The development is also well-connected to public transportation, making it easy for residents to commute to work or explore the vibrant surroundings.

In terms of community engagement, Desa RM100LP promotes a sense of belonging among its residents. Regular community events and activities are organized to foster connections and enhance the quality of life for all inhabitants.

Overall, Desa RM100LP embodies modern living principles by combining affordability, sustainability, technology, and community spirit. Its thoughtful design and strategic location make it an attractive option for individuals and families looking for a comfortable and dynamic living environment. Whether you are a first-time homebuyer or seeking a new community, Desa RM100LP is poised to meet your needs and exceed your expectations.