200,000 BTU/HR

PORTABLE FORCED AIR HEATER

ASSEMBLY

This model is furnished with wheels and handles. Wheels, handles, and the mounting hardware are found in the shipping carton.

TOOLS NEEDED

Medium Phillips Screwdriver

3/8" Open or Adjustable Wrench

Hammer

1.Slide axle through wheel support frame. Install wheels on axle.

IMPORTANT: When installing wheels, point extended hub of wheels toward wheel support frame (see Figure 2).

2.Place cap nuts on axle ends. Gently tap with hammer to secure.

3.Place heater on wheel support frame. Make sure air inlet end (rear) of heater is over wheels. Line up holes on fuel tank flange with holes on wheel support frame.

4.Place handles on top of fuel tank flange. Insert screws through handles, fuel tank flange, and wheel support frame. Attach nut finger tight after each screw is inserted.

5.After all screws are inserted, tighten nuts firmly.

FUELS

WARNING: Use only kero- sene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels.

Do not use heavy fuels such as No. 2 fuel oil or No. 2 Diesel. Using heavy fuels will result in:

clogged fuel filter and nozzle

carbon build up on spark plug

the need of nontoxic anti-icer in fuel dur- ing very cold weather

Front

Handle

IMPORTANT: Use a KEROSENE ONLY storage container. Be sure storage container is clean. Foreign matter such as rust, dirt, or water will cause the flame-out control to shut down heater. Foreign matter may also require you to clean fuel system often.

Screw

Hot Air

Outlet

Fuel

Tank

Flange

Wheel

Support

Frame

Rear

Handle

Air

Inlet

VENTILATION

WARNING: Follow the mini- mum fresh, outside air ventila- tion requirements. If proper fresh, outside air ventilation is not pro- vided, carbon monoxide poison- ing can occur. Provide proper fresh, outside air ventilation be- fore running heater.

Provide at least a three-square-foot opening of fresh, outside air for each 100,000 Btu/Hr rating. Provide extra fresh air if more heat- ers are being used.

Example: A 200,000 Btu/Hr heater re- quires one of the following:

Wheel

Nut

a two-car garage door (16 feet wide open-

 

ing) raised five inches

a single-car garage door (9 feet wide

Cap Nut

Axle

Extended Hub

opening) raised eight inches

• two windows (30 inches wide opening)

raised fifteen inches

Figure 2 - Wheel and Handle Assembly

4

103607

Page 4
Image 4
Desa RM200T owner manual Assembly, Fuels, Ventilation, Tools Needed

RM200T specifications

Desa RM200T is a cutting-edge machine designed to elevate agricultural efficiency and productivity. This advanced piece of equipment is specifically engineered for farmers and agricultural enterprises seeking robust performance, durability, and modern technology.

One of the key features of the Desa RM200T is its powerful engine, which provides high torque and reliability even under challenging conditions. The engine is designed for fuel efficiency, allowing users to maximize productivity while minimizing operational costs. This feature is particularly important for farmers looking to optimize their resources and achieve better returns on their investments.

The RM200T boasts an ergonomic design, focusing on user comfort and ease of operation. The controls are intuitively placed, enabling operators to handle the machine with minimal training. The spacious cabin is equipped with air conditioning and excellent visibility, ensuring that users can work comfortably and efficiently for extended periods.

In terms of technology, the Desa RM200T integrates smart farming solutions. It is equipped with GPS systems for accurate navigation and mapping, allowing for precision agriculture practices. This technological advancement enables farmers to analyze field data effectively, leading to informed decision-making and enhanced crop management.

Another noteworthy characteristic of the RM200T is its versatility. It can adapt to a variety of agricultural tasks, including plowing, tilling, and planting. This multi-functionality makes it an invaluable asset for farmers, allowing them to use one machine for a range of operations, thus saving time and reducing the need for multiple equipment purchases.

The durability of the Desa RM200T is a significant highlight. Built with high-quality materials, it can withstand harsh weather conditions and heavy workloads. Regular maintenance is made easy with accessible components, ensuring that the machine remains in optimal working condition over time.

Furthermore, the RM200T is designed with sustainability in mind. Its fuel-efficient engine and minimal environmental impact align with modern farming practices, which prioritize ecological responsibility.

In summary, the Desa RM200T is a remarkable piece of agricultural machinery characterized by its powerful engine, user-friendly design, advanced technology, versatility, durability, and commitment to sustainability. It positions itself as an essential tool for modern farmers aiming to enhance their productivity and embrace the future of agriculture.