Safety Information

SAFETY INFORMATION

WARNINGS

WARNING: This product contains and/or generates chemicals known to the State of California to cause cancer or birth defects, or other reproductive harm.

WARNING: FIRE, BURN, INHALATION, AND EX- PLOSION HAZARD. KEEP SOLID COMBUSTIBLES, SUCH AS BUILDING MATERIALS, PAPER OR CARD- BOARD, A SAFE DISTANCE AWAY FROM THE HEATER AS RECOMMENDED BY THE INSTRUC- TIONS. NEVER USE THE HEATER IN SPACES WHICH DO OR MAY CONTAIN VOLATILE OR AIRBORNE COMBUSTIBLES, OR PRODUCTS SUCH AS GASO- LINE, SOLVENTS, PAINT THINNER, DUST PARTICLES OR UNKNOWN CHEMICALS.

WARNING: NOT FOR HOME OR RECREATIONAL VEHICLE USE.

The heater is designed for use as a construction heater in accordance with ANSI Z83.7/CGA 2.14. Other standards govern the use of fuel gases and heating products for specific uses. Your local authority can advise you about these. The primary purpose of construction heaters is to provide temporary heating of buildings under construction, alteration or repair. Properly used, the heater provides safe economical heating. Products of combustion are vented into the area being heated.

We cannot foresee every use which may be made of our heaters.

CHECK WITH YOUR LOCAL FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT HEATER USE.

Other standards govern the use of fuel gases and heat producing products for specific uses. Your local authorities can advise you about these.

Carbon Monoxide Poisoning: Some people are more affected by carbon monoxide than others. Early signs of carbon monoxide poisoning resemble the ﬂu, with headaches, dizziness, and/or nau- sea. If you have these signs, the heater may not be working properly. Get fresh air at once! Check for proper ventilation and have heater serviced.

Propane Gas: Propane gas is odorless. An odor-making agent is added to propane gas. The odor helps you detect a propane gas leak. However, the odor added to propane gas may fade. Propane gas may be present even though no odor exists.

Make certain you read and understand all warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

•Install and use heater with care. Follow all local ordinances and codes. In the absence of local ordinances and codes, refer to the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58 and the Natural Gas Installation Code, CAN/CGA B149.2. This in- structs on the safe storage and handling of propane gases.

•Use only the electrical voltage and frequency speciﬁed on model plate.

•The electrical connections and grounding of the heater shall fol- low the National Electric Code, ANSI/NFPA 70, or Canadian Electrical Code, part 1.

•Electrical grounding instructions — This appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle.

•Use only a three-prong, grounded extension cord.

•Use only the hose and factory preset regulator provided with the heater.

•Use only propane gas set up for vapor withdrawal.

•Provide adequate ventilation. Before using heater, provide at least a 1.5-square-foot opening of fresh, outside air.

•This product has been approved for use in the Commonwealth of Massachusetts.

•For indoor use only. Do not use heater outdoors.

•Do not use heater in occupied dwellings or in living or sleep- ing quarters.

•Do not use heater below ground level. Propane gas is heavier than air. If a leak occurs, propane gas may sink to the lowest possible level.

•Keep appliance area clear and free from combustible materials, gasoline, paint thinner, and other flammable vapors and liquids. Do not use heater in areas with high dust content.

•Minimum heater clearances from combustibles:

Outlet: 6 Ft. Sides: 2 Ft. Top: 6 Ft. Rear: 2 Ft.

•Keep heater at least six feet from propane tank(s). Do not point heater at propane tank(s) within 20 feet.

•Keep propane tank(s) below 100° F.

•Check heater for damage before each use. Do not use a dam- aged heater.

•Check hose before each use of heater. If highly worn or cut, replace before using heater.

•Locate heater on stable and level surface if heater is hot or operating.

•Not intended for use on finished floors.

•Never block air inlet (rear) or air outlet (front) of heater.

•Keep heater away from strong drafts, water spray, rain, or drip- ping water.

•Do not leave heater unattended.

•Keep children and animals away from heater.

•Never move, handle, or service a hot, operating, or plugged-in heater. Severe burns may result. Wait 20 minutes after turning heater off.

For morevisit www..com

105331-01C

ROPANE CONSTRUCTION HEATER specifications

Desa Ropane Construction Heater is a powerful solution designed to provide efficient heating for construction sites, workshops, and other commercial environments. With its robust build and advanced technology, it ensures consistent warmth even in the coldest weather conditions.

One of the main features of the Desa Ropane Construction Heater is its high heat output. With various models available, users can choose units that deliver up to 200,000 BTUs, making it suitable for large spaces. This high output ensures that materials set properly and that workers remain comfortable and productive, regardless of the chilly outdoor conditions.

Another notable characteristic is its portability. The heater is designed with rugged wheels and a durable casing, allowing it to be easily maneuvered from one location to another. This feature is especially beneficial for construction sites where the heating needs may change throughout the day or the project.

The heater operates on propane, leveraging the fuel's high efficiency for longer heating durations. Its ability to quickly warm up spaces ensures that downtime is minimized, which is crucial in the fast-paced world of construction. Additionally, propane is readily available and cost-effective, making this heater an economical choice for contractors.

Desa Ropane Construction Heater also features an adjustable heat control system, allowing users to set the desired temperature according to their specific needs. This flexibility is key to optimizing energy consumption and ensuring safety, as it prevents overheating in smaller spaces.

Safety is a top priority in any heating system, and the Desa Ropane heater incorporates several built-in safety features. These include automatic shut-off mechanisms that activate in case of low oxygen levels or if the unit overheats. This provides peace of mind for users while maintaining a safe working environment.

The design of the heater also includes a directional venting system, which allows for more effective heat distribution. This system ensures that areas are warmed evenly, reducing cold spots that can lead to discomfort or inefficiencies.

In summary, the Desa Ropane Construction Heater stands out with its exceptional heat output, portability, adjustable controls, and safety features. This heater is built to cater to the specific requirements of construction and commercial spaces, providing reliable, efficient heating solutions that enhance productivity and comfort. Its combination of technology and practicality makes it a preferred choice for construction professionals across various industries.

Desa ROPANE CONSTRUCTION HEATER owner manual Safety Information

Models: ROPANE CONSTRUCTION HEATER

ROPANE CONSTRUCTION HEATER specifications