OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Ignitor Button

Front

Panel

Control Knob

Grill

Guard

Heat Shield

Cabinet

AIR FOR COMBUSTION AND VENTILATION

WARNING: This CO2 genera- tor shall not be installed in a con- fined space unless provisions are provided for adequate combus- tion and ventilation air. Read the following instructions to insure proper fresh air for this and other fuel-burning appliances in your greenhouse. Install in accordance with Can Gas Code B-149.1 and 2-M95, Section 6.3 Gas Installa- tion Code and/or local codes.

PROVIDING ADEQUATE VENTILATION

Unconfined Space

Can Gas Code B-149.1 and 2-M95, Section

Figure 1 - Vent-Free Propane/LP or Natural Gas Appliance

6.3.3 states “An appliance installed for the

production of carbon dioxide in a green-

house may take its combustion air from

inside the greenhouse when the rate of com-

bustion does not exceed 20 Btuh per ft3 (0.2

LOCAL CODES

Install and use appliance with care. Follow all local codes. In the absence of local codes, use the latest edition of National Fuel Gas Code ANSI Z223.1, also known as NFPA 54* and Canadian Gas Code B-149.1 and 2-M95, Section 6.3 gas installation code.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

PRODUCT

FEATURES

Safety Device

This appliance has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS). The ODS/pilot is a required feature for vent- free CO2 generators. The ODS/pilot shuts off the CO2 generator if there is not enough fresh air.

Piezo Ignition System

This CO2 generator has a piezo ignitor. This system requires no matches, batteries, or other sources to light appliance.

kW per m3) of greenhouse volume and the

concentration of carbon monoxide in the

atmosphere does not exceed 35 ppm. The

concentration of carbon dioxide and carbon

monoxide shall be verified upon initial

startup.

Confined Space

Ventilation air shall be supplied in accor- dance with Can Gas Code B-149.1 and 2- M95, Sections 7.2 and 7.3 and/or local codes.

This CO2 generator is intended for installa- tion in a greenhouse only.

This appliance shall not be installed in a confined space or unusually tight construc- tion unless provisions are provided for ad-

UNPACKING

1.Remove CO2 generator from carton.

2.Remove all protective packaging ap- plied to CO2 generator for shipment.

3.Check CO2 generator for any shipping damage. If unit is damaged, promptly inform dealer where you bought it.

equate combustion and ventilation air.

Produce Storage Areas

Can Gas Code B-149.1 and 2-M95, Section

6.3.2states “An appliance used in a produce storage area shall take its combustion air from outside the storage area”.

Continued

105056

3

Page 3
Image 3
Desa RN30E-CAN Product Identification, AIR for Combustion and Ventilation, Local Codes, Product Features, Unpacking

RP30E-CAN, RN30E-CAN specifications

Desa RN30E-CAN and RP30E-CAN are cutting-edge compact portable generators that stand out in the market for their versatility and efficiency. Designed for a variety of applications, from camping trips to emergency power supply, these generators provide reliable performance in a compact format.

One of the key features of the RN30E-CAN and RP30E-CAN is their robust engine design. Powered by advanced gasoline engines, both models offer impressive starting capabilities and sustained power output. The RN30E-CAN produces a maximum output of 3,000 watts, while the RP30E-CAN takes it a step further with a peak output of 3,500 watts. This makes them ideal choices for powering essential devices, ranging from small appliances to larger equipment.

Efficiency is another hallmark of these generators. With a focus on fuel economy, both models incorporate innovative technologies that minimize fuel consumption while maximizing power. This not only helps save money but also reduces the environmental footprint of the generators. Users can take advantage of extended run times, making them perfect for longer outings or during unexpected outages.

In terms of user-friendly design, both RN30E-CAN and RP30E-CAN generators come equipped with intuitive control panels that simplify operation. The clear layout allows users to monitor power output and fuel levels effortlessly. Additionally, their lightweight construction, paired with integrated wheels and handles, enhances portability, making them easy to transport to any location.

Safety features are paramount in the design of the RN30E-CAN and RP30E-CAN. Equipped with automatic shutdown functions in the event of low oil levels and overload protection circuits, they provide peace of mind to users. The generators also boast a weather-resistant casing, ensuring durability and reliability even in adverse conditions.

Finally, both models are designed with noise reduction technology, making them quieter than many traditional generators. This makes them suitable for use in residential areas and during nighttime hours, allowing users to enjoy the benefits of portable power without disturbing their surroundings.

In summary, the Desa RN30E-CAN and RP30E-CAN generators combine power, efficiency, and safety into compact units that meet the needs of diverse users. Their advanced technology, ease of use, and portability make them excellent choices for anyone seeking reliable power on the go.