VENT-FREE PROPANE/LP PEDESTAL STOVE

INSTALLATION

Continued

INSTALLING LOGS

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

CAUTION:Afterinstallationand periodically thereafter, check to en- surethatno flamecomes incontact with any log. With the heater set to High, check to see if flames contact any log. If so, reposition logs ac- cording to the log installation in- structions in this manual. Flames contacting logs will create soot.

It is very important to install the logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

Place one-piece log set on grate to fit as illustrated in Figure 10. Make sure log sits flat on firebox floor (see Figure 10).

IMPORTANT: Make sure log does not cover any burner ports (see Figure 11).

INSTALLING OPTIONAL BLOWER ACCESSORY GA3750

Tools required: Phillips screwdriver

NOTICE: Shut off gas heater during the following blower installation.

1.Remove 2 screws from rear tabs on top trim. Pull trim forward to remove (see Figure 12).

2.Remove top panel of stove by remov- ing three screws from under top lip on each side of stove (see Figure 12).

3.Facing front of stove, carefully slide top panel forward until it is completely re- moved from stove (see Figure 12).

4.Install one plastic bushing provided in blower kit into the 1 1/2" hole in the left rear of firebox floor. Access hole through the rectangular opening in the rear panel (see Figure 13).

5.Disconnect power cord wires from blower motor (if connected) (see Figure 14).

6.Disconnect green ground wire from blower housing (if connected) by re- moving screw holding wire terminal (see Figure 14).

7.Remove the two blower mounting brackets from the rear panel by remov- ing two screws each (see Figure 15).

8.Attach the two mounting brackets to blower housing using four screws pro- vided in blower kit (2 for each bracket) (see Figure 15). Tighten screws se- curely. Place blower assembly tempo- rarily on top of firebox.

9.Working from the rear of the stove, place entire power cord, including speed control housing, in lower control compartment.

10.Route ends of 3-wire power cord up from the lower control compartment through the plastic bushing, then up to the upper cavity of stove (see Figure 16, page 11).

11.Attach the terminal ends of the white and black power cord wires to the ter- minals on the blower motor (see Fig- ure 13). Push firmly.

12.Attach the terminal end of the green power cord wire to the front tab of the blower housing using screw provided (see Figure 13).

White

Powercord

Wire

Screw

Green

Ground Wire

Black Powercord Wire

Figure 14 - Removing Wires from Blower

One Piece

Log Set

Firebox Floor

Top Panel

Top

Trim

Screws

Screws

Blower

Bracket

Blower

Screws

Figure 10 - Installing One-Piece Log Set

Burner Ports

One Piece Log Set

Figure 11 - Installing One-Piece Log set (Top View)

Screws

Figure 12 - Removing Stove Top Panel

Figure 13 - Installing Bushing

Firebox Top

Figure 15 - Removing Blower Brackets from Stove and Attaching to Blower

For more information, visit www.desatech.com

10

107435

Page 9 Page 11
Page 10
Image 10
Desa S39PT installation manual Installing Logs, Installing Optional Blower Accessory GA3750
Page 9 Page 11

S39PT specifications

Desa S39PT is an innovative solution that stands at the forefront of modern technology and sustainable development. Designed as a multi-functional platform, this advanced system integrates various features aimed at enhancing productivity and efficiency across various sectors, particularly in agricultural and industrial applications.

One of the main characteristics of Desa S39PT is its state-of-the-art automation capabilities. By utilizing artificial intelligence and machine learning algorithms, the platform can analyze vast amounts of data in real-time. This allows users to make informed decisions based on predictive analytics, optimizing processes and reducing waste. Whether for crop management or resource allocation in manufacturing, these technologies enable significant improvements in operational efficiency.

Another noteworthy feature of Desa S39PT is its commitment to sustainability. The platform is equipped with renewable energy technologies, including solar and wind integration, making it a preferred choice for those looking to minimize their carbon footprint. This commitment to green energy not only supports eco-friendly practices but also results in cost savings in the long run.

Desa S39PT also boasts a user-friendly interface, allowing even those with limited technological know-how to navigate the system effortlessly. The platform provides comprehensive training and support resources, ensuring that all users can maximize its potential. Furthermore, its modular design allows for customization according to specific user needs, making it adaptable to various environments and industries.

Connectivity is another vital aspect of Desa S39PT. With robust IoT capabilities, the system enables seamless communication between devices and systems. This interconnectedness facilitates the gathering of data from multiple sources, providing a holistic view of operations and enabling further optimization.

Security is paramount in the design of Desa S39PT. The platform incorporates advanced cybersecurity measures to protect sensitive data, ensuring that users can operate in a trustworthy environment.

In conclusion, Desa S39PT represents a significant advancement in technology, combining automation, sustainability, ease of use, connectivity, and security. This platform is ideal for entities seeking to enhance their operational efficiency while adhering to environmentally responsible practices, marking a progressive step towards a more sustainable future. As industries continue to evolve, solutions like Desa S39PT will play a critical role in meeting the challenges of tomorrow.
Top Page Image Contents