Manuals / Desa / Kitchen Appliance / Oven

Desa SBVBN(D) Cast Iron Stove and B-VENT Burner System Assembly, Stove Body Assembly

Models: SBVBN(D)

1 36
Download 36 pages 52.57 Kb
Page 5
Image 5

PRE-INSTALLATION PREPARATION

Location and Space Requirements (Cont.)

CAST IRON STOVE AND B-VENT BURNER SYSTEM ASSEMBLY

Stove Body Assembly

5

PRE-INSTALLATION PREPARATION

Continued

4" 4"

Figure 4 - Clearance for Corner Installation

26 1/4"

Front

19 1/2"

7.Carefully lay stove body on back to attach bottom components to stove body (see Figure 7). Rest stove on drop cloth or blanket to avoid scratching stove edges.

8.Remove remaining pallet wood attached to bottom of stove body (see Figure 8). Use an adjustable wrench to remove bolts.

9.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figure 9 and Figure 10 on page 6). Use an adjustable wrench or a 12mm socket.

Bolt

Back Stove

Panel

Product Identification Label

with Model and Serial Numbers

Figure 6 - Removing Back Panel

Figure 5 - Stove With Burner System Bottom Dimensions

CAST IRON STOVE AND B-VENT BURNER SYSTEM ASSEMBLY

STOVE BODY ASSEMBLY

1.

Lift off corrugated box enclosing stove body crating.

2.

Remove all screws fastening the wood frame enclosure. Spread

Top of Stove Unit

Front of

Stove

Unit

Drop

Cloth/

Blanket

Front of

Top of

Stove

Stove Unit

Unit

 

Pallet

Wood

Bolted to

Bottom of

Stove

Body

 

wood frame open and lift away from plastic-bagged stove body.

 

The bottom pieces of pallet wood will remain bolted to the

 

stove body.

3.

Remove plastic bag from stove body.

4.

Locate the product identification label on the back panel (see

 

Figure 6) and record the model number and 7 digit serial num-

 

ber in the space provided in the back of this owner’s manual.

 

Retain this operation and installation manual for future refer-

 

ence and warranty.

5.

Remove back panel from stove and discard (see Figure 6). Use

 

an adjustable wrench or a 10 mm socket. Remove six (6) bolts

 

and washers. Keep bolts and washers to reattach rear cover.

6.

Remove all contents from inside stove cavity. Contents include:

 

(1) - Stove bottom (Discard - Not used with this application)

 

(4)

- Legs with leg leveler bolts

 

(1)

- Bottom door

 

(3)

- Top grates

 

(1)

- Hardware kit bag with fasteners

Figure 7 - Laying Down Stove On Side

Front

Bolt

Pallet

 

Wood

Pallet Wood

Bottom Of

Stove Unit

 

Figure 8 - Removing Pallet Wood From The Bottom of The Stove

Door Hinge

Front

Door Catch Bolt

Step Bolt Hole

 

With Adjustable

 

 

 

 

Hex Nuts Hole

Bottom Of

Stove Unit

Leg Hole

Figure 9 - Locating Threaded Holes for Legs and Door Attachment

For morevisit www..com

112127-01A

Page 4 Page 6
Page 5
Image 5
Desa SBVBN(D) installation manual Cast Iron Stove and B-VENT Burner System Assembly, Stove Body Assembly
Page 4 Page 6

SBVBN(D) specifications

Desa SBVBN(D) is an innovative development that stands out as a beacon of sustainable urban planning and advanced technological integration. Situated in a strategic location, it seeks to create a harmonious blend of modern living and environmental stewardship. The design ethos behind Desa SBVBN(D) revolves around minimizing the ecological footprint while maximizing community well-being.

One of the main features of Desa SBVBN(D) is its commitment to sustainable architecture. Buildings within the community are constructed using eco-friendly materials and designed to harness natural resources effectively. Solar panels are integrated into rooftops, contributing to energy self-sufficiency and significantly lowering energy costs for residents. In addition, rainwater harvesting systems and greywater recycling initiatives ensure responsible water usage, making the community resilient against water scarcity.

The layout of Desa SBVBN(D) emphasizes walkability and connectivity. Wide pedestrian pathways and cycling tracks encourage residents to engage in healthy, active lifestyles while reducing reliance on motor vehicles. Plentiful green spaces, including parks and community gardens, foster social interaction and provide recreational opportunities for families, promoting a sense of belonging among residents.

Technologically, Desa SBVBN(D) is at the forefront of smart city innovations. The implementation of IoT (Internet of Things) devices allows for real-time monitoring of energy usage, traffic patterns, and environmental conditions. Smart lighting systems that adjust based on natural light levels enhance safety while conserving energy. Furthermore, a dedicated app facilitates communication between residents and local authorities, streamlining services and community engagement.

Another distinctive characteristic of Desa SBVBN(D) is its focus on inclusivity and diversity. The community is designed to cater to various demographic groups, offering a range of housing options from affordable units to luxury apartments. Community centers serve as hubs for cultural exchange, educational workshops, and vocational training, empowering residents and fostering a collaborative spirit.

In conclusion, Desa SBVBN(D) represents a forward-thinking approach to urban living, marrying sustainability with technology. With its emphasis on community, resilience, and innovation, it stands as a model for future developments aimed at enhancing the quality of life while protecting the planet for future generations.