80,000 BTU/HR

PROPANE CONSTRUCTION HEATER

SAFETY

INFORMATION

WARNINGS

WARNING: FIRE, BURN, IN-

HALATION, AND EXPLOSION HAZARD. KEEP SOLID COMBUS- TIBLES, SUCH AS BUILDING MA- TERIALS, PAPER OR CARD- BOARD, A SAFE DISTANCE AWAY FROM THE HEATER AS RECOMMENDED BY THE IN- STRUCTIONS. NEVER USE THE HEATER IN SPACES WHICH DO OR MAY CONTAIN VOLATILE OR AIRBORNE COMBUSTIBLES, OR PRODUCTS SUCH AS GASO- LINE, SOLVENTS, PAINT THIN- NER, DUST PARTICLES OR UN- KNOWN CHEMICALS.

WARNING: NOT FOR HOME OR RECREATIONAL VEHICLE USE.

The heater is designed for use as a construction heater in accordance with ANSI Z83.7/CGA

2.14.Other standards govern the use of fuel gases and heating products for specific uses. Your local authority can advise you about these. The primary purpose of construction heaters is to provide temporary heating of buildings under construction, alteration or re- pair. Properly used, the heater provides safe economical heating. Products of combustion are vented into the area being heated.

We cannot foresee every use which may be made of our heaters. CHECK WITH

YOUR LOCAL FIRE SAFETY AU- THORITY IF YOU HAVE QUESTIONS ABOUT HEATER USE.

Other standards govern the use of fuel gases and heat producing products for specific uses. Your local authorities can advise you about these.

Carbon Monoxide Poisoning: Some people are more affected by carbon monox- ide than others. Early signs of carbon mon- oxide poisoning resemble the flu, with head- aches, dizziness, and/or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Check for proper ventilation and have heater serviced.

Propane Gas: Propane gas is odorless. An odor-making agent is added to propane gas. The odor helps you detect a propane gas leak. However, the odor added to propane gas may fade. Propane gas may be present even though no odor exists.

Make certain you read and understand all Warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

Install and use heater with care. Follow all local ordinances and codes. In the absence of local ordinances and codes, refer to the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58 and the Natural Gas In- stallation Code, CAN/CGA B149.2. This instructs on the safe storage and handling of propane gases.

Approved by the New York City Fire Department under Certificate of Ap- proval #4953. To be used only at con- struction site with applicable New York City codes, regulations, rules, directives, permits, etc.

This product has been approved for use in the Commonwealth of Massachusetts.

Use only propane gas set up for vapor withdrawal.

Provide adequate ventilation. Before us- ing heater, provide at least a 2.5 square foot opening of fresh, outside air. This heater produces carbon monoxide, which is listed by the State of California as a reproductive toxin under Proposition 65.

For indoor use only. Do not use heater outdoors.

Keep heater away from strong drafts, wind, water spray, rain, or dripping water.

Do not use heater in occupied dwellings or in living or sleeping quarters.

Do not use heater in a basement or be- low ground level. Propane gas is heavier than air. If a leak occurs, propane gas may sink to the lowest possible level.

Keep appliance area clear and free from combustible materials, gasoline, paint thinner, and other flammable vapors and liquids. Dust is combustible. Do not use heater in areas with high dust content.

Minimum heater clearances from com- bustibles: Sides: 3 feet, Top: 6 feet.

Keep heater at least six feet from pro- pane tank(s).

Keep propane tank(s) below 100° F.

Use only the hose and factory preset regulator provided with the heater.

Check heater for damage before each use. Do not use a damaged heater.

Check hose before each use of heater. If highly worn or cut, replace with hose specified by manufacturer before using heater.

Do not alter heater. Keep heater in its original state.

Do not use heater if altered.

Locate heater on stable and level surface if heater is hot or operating.

Not intended for use on finished floors.

Never block air inlet (bottom of shell) or air outlet (around top of shell) of heater.

Do not leave heater unattended.

Keep children and animals away from heater.

Never move, handle, or service a hot or operating heater. Severe burns may re- sult. You must wait 15 minutes after turn- ing heater off.

To prevent injury, wear gloves when han- dling heater.

Never attach duct work to heater.

Turn off propane supply to heater when not in use.

Use only original replacement parts. This heater must use design-specific parts. Do not substitute or use generic parts. Im- proper replacement parts could cause serious or fatal injuries.

2

103385

Page 2
Image 2
Desa TC80V, RCP80V owner manual Safety Information, Use only propane gas set up for vapor withdrawal

RCP80V, TC80V specifications

The Desa TC80V and RCP80V are cutting-edge technologies designed for industrial and commercial applications. These robust models are part of the highly regarded line of equipment from Desa, known for their reliability, efficiency, and innovative features.

The Desa TC80V is a premier heating unit that excels in both performance and energy efficiency. It integrates advanced combustion technologies, optimizing fuel usage and reducing emissions. Part of its appeal lies in its compact design, making it suitable for various spaces without compromising on heat output. The TC80V operates with a user-friendly digital control panel that allows operators to set precise temperatures and monitor performance in real-time, ensuring that environments remain comfortable and conducive to productivity.

On the other hand, the Desa RCP80V is a high-performance cooling system that offers exceptional versatility. It utilizes a state-of-the-art refrigeration cycle that promotes maximum cooling efficiency while minimizing energy consumption. The RCP80V features a variable speed compressor that adjusts the cooling output based on the ambient conditions. This adaptability not only enhances comfort but also lowers operational costs, making it an economical choice for businesses seeking reliable climate control solutions.

Both models boast impressive durability and build quality, designed to withstand harsh operating conditions. They are equipped with corrosion-resistant materials, ensuring a long lifespan and reducing maintenance needs. Furthermore, these units incorporate advanced safety features, including automatic shut-off systems and temperature monitoring, to guarantee safe operation in any environment.

The Desa TC80V and RCP80V are also designed with energy efficiency in mind. They meet and exceed industry standards for energy consumption, making them environmentally friendly choices that contribute to a company’s sustainability goals. With features such as programmable timers and energy-saving modes, they help reduce overall energy costs while delivering optimal performance.

In summary, the Desa TC80V and RCP80V are distinguished by their advanced technologies, user-friendly controls, exceptional durability, and energy-efficient operations. These models represent the future of heating and cooling solutions, making them ideal choices for businesses looking to invest in reliable and cost-effective equipment. Whether for heating or cooling needs, Desa has created a solution that combines innovation with practicality.