SAFETY INFORMATION

Continued

15.Install the heater such that it is not directly exposed to water spray, rain, dripping water and/or wind.

16.Operate only on a stable, level surface.

17.Due to the high surface and exhaust tempera- tures, adults and children must observe clear- ances to avoid burns or clothing ignition.

18.Do not move, handle or service while hot or burning. Do not attach or remove a hot or operating heater from the propane/LP tank.

19.Before each use, check heater for leaks. Never use an open flame to check for leaks. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks.

20.Keep all connections and fittings clean. Make sure propane/LP tank valve is clean. Check "O" ring on heater inlet fuel valve connector for damage before each use. Replace if worn or damaged.

21.Use only in accordance with local codes or, in the absence of local codes, with the Standard for the Storage and Handling of Liquefied Pe- troleum Gases ANSI/NFPA 58 and CSA B149.1, Natural Gas and Propane Installation Code.

ASSEMBLY

INSTRUCTIONS

30,000 BTU MODELS ONLY

1.Inspect the heater components for possible shipping damage. If any is found, immediately notify the dealer. Check to make sure that all components are included with your heater (see pages 8 and 9).

2.Insert the piezo ignitor into the bracket on the burner support bracket as shown in Figure 1. Tighten the piezo mounting nut. Do not over tighten the nut.

3.Connect the burner hoses together as shown in Figure 2. Wrench tighten to insure leak tight connection.

4.Mount the burner assembly onto the support arm using the burner head mounting brackets and brass screws as shown in Figure 3. Place side of bracket into the slot on support arm. Secure with screw. Make certain that the air holes on the sides of the burner tube are not blocked. Securely tighten the burners into place.

5.Attach the electrode wires to the piezo ignitor as shown in Figure 4.

Piezo Ignitor

Piezo

Mounting

Nut

Burner

Support

Bracket

Figure 1 - Installing Piezo Ignitor

Figure 2 - Attaching Burner Hoses to

Regulator

Burner Head

Assembly

Slot

Support

Arm

 

 

Air Hole

Brass Screw

Burner Head

Mounting Bracket

 

Figure 3 - Attaching Burner Head

Assembly to Support Arm

Piezo Ignitor

Electrode Wires

Figure 4 - Attaching Electrode Wires to Piezo Ignitor

4

www.desatech.com

113973-01C

Page 3 Page 5
Page 4
Image 4
Desa AND TT15A 10, TT30, N15A, HD15A, HD30, 000-15, 000 BTU SPC-30R owner manual Assembly Instructions, 30,000 BTU Models only
Page 3 Page 5

HD15A, 000-15, HD30, N15A, 000 BTU SPC-30R specifications

The Desa HD30, AND TT15A 10, TT30, HD15A, and 000 BTU SPC-30R are innovative heating solutions designed to provide efficient warmth and comfort in various spaces. These models feature advanced technology and user-friendly characteristics that cater to diverse heating needs.

One of the standout features of the Desa HD30 is its powerful heating capacity of 30,000 BTUs, making it ideal for larger areas. It incorporates modern combustion technology, ensuring efficient fuel usage while minimizing emissions. The sleek design of the HD30 complements any decor, making it a practical addition to homes or workspaces.

The AND TT15A 10 is known for its compact size and versatility. With a heating output of 15,000 BTUs, this model is perfect for smaller rooms or areas that require supplemental heating. Its lightweight construction makes it easy to move from room to room, ensuring continuous warmth wherever needed. Additionally, it features an adjustable thermostat, allowing users to set their desired temperature easily.

The TT30 model echoes the efficiency of the HD30 with a 30,000 BTU output, designed for larger environments. Its advanced thermoelectric system enhances heating performance while reducing energy consumption. The TT30 also comes with a user-friendly control panel, making it easy to adjust settings according to user preferences.

For those seeking a modern heating solution, the HD15A model stands out with its blend of aesthetic appeal and functionality. With a heating capacity of 15,000 BTUs, it is energy-efficient and supports various fuel types. The unit’s lightweight yet durable build makes it suitable for both indoor and outdoor use, providing flexibility for users.

The 000 BTU SPC-30R model integrates a unique digital display for easy temperature management. It boasts a robust fan system to distribute heat evenly throughout the room efficiently. This model emphasizes safety, featuring automatic shut-off in case of overheating, and ensuring peace of mind for users.

In summary, the Desa HD30, AND TT15A 10, TT30, HD15A, and 000 BTU SPC-30R heating models embody a commitment to quality and performance. With features such as adjustable thermostats, lightweight designs, robust heating capacities, and advanced safety technologies, these models cater to a wide range of heating needs, making them reliable choices for homeowners and businesses alike.
Top Page Image Contents