Venting Installation
Continued
Minimum Pipe | Siding Standoff | ||
Overlap 1 | 1/4" | ||
| |||
| Screws | ||
Pipe |
| ||
|
| ||
Wall |
|
| |
Firestop |
|
| |
Maintain 1" |
|
|
| ||||
Minimum Air |
|
|
| ||||
Space Around |
| High Wind | |||||
Outer Pipe When | Termination | ||||||
Penetrating a Wall | Apply | ||||||
|
|
|
|
|
| ||
|
|
|
|
|
| Mastic to | |
11 | 1 | 2 | " x 11 | 1 | 2 | Outside | |
| / |
| / " | Edge of | |||
Framed Opening | |||||||
Standoff | |||||||
|
|
|
|
|
| ||
|
|
| Exterior Wall with Vinyl Siding | ||||
Figure 13 - Typical Horizontal Termination Cap Mounting with Additional Siding Standoff Installed
Horizontal Termination Configurations Figures 14 through 18 show different configurations and alternatives for venting with horizontal termination. Each figure includes a chart with critical minimum and maximum dimensions which MUST be met. IMPORTANT: If using a venting configuration of only horizontal venting with no vertical run, a 1/4" rise for every 12" of run toward the termination is required.
NOTICE:Donotsealtermination cap to vent pipe. Cap must be removable for vent inspection and maintenance.
GROUND FLOOR INSTALLATION
Recommended Applications:
•Installation using cabinet surrounds
•Through the wall using round or square termination (up to 12" adjustable pipe)
•NOT FOR CORNER INSTALLATION
Adjustable
Horizontal Pipe 12" Max. 45° Elbow
High Wind
Square
Termination
Wall Firestop
Square Termination
Vertical (V) |
| Horizontal (H) | ||
32 3/4" min. |
| 17" max. | ||
|
|
|
| Exterior |
45° Elbow |
| Portion of | ||
|
|
|
| Wall Firestop |
Wall |
| (Round | ||
Firestop |
| Termination | ||
|
|
|
| Only) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Horizontal
Round
Termination
Round
Termination
WARNING: Never run vent downward as this may cause excessive temperatures which could cause a fire. Operation of improperly installed and maintained venting system could result in serious injury, property damage or loss of life.
*If installing this fireplace at altitudes of 4000 feet and above, it is recommended that an additional vertical height of 6" be added to the vent system.
Figure 14 - Horizontal Termination Configuration for Square or Round Terminations
12 | www.desatech.com |