®

NATURAL GAS RESIDENTIAL HEATERS

ASSEMBLY

Continued

5.

Slide other end of adjusting plate/shim

 

in slot on mitered edge of side brass

 

trim (see Figure 5).

6.

While firmly holding edges of brass

Log

Front Panel

Sheet Metal

 

 

Screw

Truss-

Head

Screw

Nut

Deflector

Heater

Cabinet

Hood

Log

Retaining

Brackets

Burner Shield

Screw

 

trim together, tighten both set screws

 

on the adjusting plate with slotted

 

screwdriver.

7.

Repeat steps 1 through 6 for other side.

8.

Place the assembled trim on front of

 

heater cabinet. Attach on top and sides

 

with four brass screws included in hard-

 

ware package (see Figure 6).

9.

Reattach front panel to heater if you are

 

going to mount the heater to the base.

 

Do not reattach front panel at this time

 

if you are going to mount heater to wall.

Top Brass

Adjusting Trim

Side Brass Plate

Trim

Set

Screws

Brass Front Trim

Screen

 

Screw

Shim

Figure 3 - Assembling Heater

WARNING: Always have burner shield and screen in place before operating heater. This pre- vents excessive temperatures on heater surfaces.

Failure to position the parts in accordance with these diagrams or failure to use only parts spe- cifically approved with this heater may result in property damage or

Brass Front Trim

Truss-Head Screw

Front Panel

Nut

Slot

Slot

Mitered Edge

Figure 5 - Assembling Brass Trim

Screws

Assembled

Brass Trim

personal injury.

Figure 4 - Attaching Brass Front Trim to Front Panel

Attaching Brass Front Trim to Front Panel

1.Locate brass front trim in brass trim package.

2.Slide the head of two truss-head screws from hardware packet into each end of brass front trim (see Figure 4).

3.Line up screws with holes in front panel (see Figure 3). Insert screws in holes. Attach nuts from inside of front panel. Tighten with wrench.

Assembling and Attaching Brass Trim

1.Remove packaging from remaining three pieces of brass trim.

2.Locate four brass screws, two adjust- ing plates with set screws, and two shims in the hardware packet.

3.Align shim under adjusting plate as shown in Figure 4.

4.Slide one end of adjusting plate/shim in slot on mitered edge of top brass trim (see Figure 5).

Figure 6 - Attaching Brass Trim to Heater

For more information, visit www.desatech.com

4

107097

Page 4
Image 4
Desa VMH3000TNA installation manual Attaching Brass Front Trim to Front Panel, Assembling and Attaching Brass Trim

VMH3000TNA specifications

The Desa VMH3000TNA is an advanced heating unit designed for residential and commercial use, providing a reliable source of warmth during colder months. This versatile heater offers a blend of efficiency, modern technology, and user-friendly features, making it a popular choice for consumers seeking comfort and practicality.

One of the standout features of the VMH3000TNA is its high heat output capability. With an impressive heating output of up to 30,000 BTUs, this heater can efficiently warm large spaces, ensuring that any room or area is kept at a comfortable temperature. This makes it an ideal choice for homes, workshops, and even smaller commercial settings.

In terms of technology, the Desa VMH3000TNA is equipped with a reliable electronic ignition system, which eliminates the need for manual lighting and improves overall convenience. This feature is especially beneficial during cold weather, as it ensures quick and effortless operation. Additionally, the heater includes adjustable thermostatic controls, allowing users to set their desired temperature and maintain it with precision.

The heating unit operates using either natural gas or propane, providing flexibility depending on the availability of fuel sources. This adaptability is particularly advantageous for users in remote areas where one fuel type may be more accessible than the other. Furthermore, the VMH3000TNA boasts an energy-efficient design, which helps to reduce operational costs while minimizing environmental impact.

Safety is a critical aspect of the Desa VMH3000TNA's design. It incorporates an automatic shut-off feature, which activates in the event of a malfunction or airflow blockage. This ensures user safety and peace of mind, making it suitable for use in various settings, from homes to commercial spaces. Moreover, the heater is equipped with a durable casing and high-quality components, ensuring longevity and reliability.

Another notable characteristic of this unit is its sleek and contemporary design. The VMH3000TNA features a stylish appearance that can seamlessly fit into a range of interior decors, making it not just a functional appliance but also an aesthetic addition to any room.

In summary, the Desa VMH3000TNA stands out as a powerful, efficient, and user-friendly heating solution. With its high output, modern technologies, versatile fuel options, and safety features, it provides an excellent choice for those seeking dependable heating for their spaces. Whether for a home or a commercial setting, this heater promises to deliver warmth and comfort throughout the cold seasons.