INSTALLATION
Checking Gas Connections (Cont.) Installing Logs
13
INSTALLATION
Continued
Equipment Shutoff Valve
Gas Meter
Control Valve Location
Figure 16 - Checking Gas Joints for Natural Gas
Rear Log (#2)
Front Log (#1)
Burner
Port
Propane/LP Supply Tank
Equipment Shutoff Valve | Grate |
| |
| Chassis |
| |
|
| Burner | |
| Figure 18 - Installing Front (#1) and Rear (#2) Logs | ||
| Center Insert | Top Left | |
| Log (#4) | ||
Control Valve Location | Log (#3) | ||
|
Figure 17 - Checking Gas Joints for Propane/LP Gas
INSTALLING LOGS
WARNING: Failure to position the parts in accor- dance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
CAUTION: After installation and periodically there- after, check to ensure that no flame comes in contact with any log. With the heater set to HIGH, check to see if flames contact any log. If so, reposition logs ac- cording to the log installation instructions in this manual. Flames contacting logs will create soot.
It is very important to install the logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.
1.Place front log (#1) and rear log (#2) on grate to fit as illus- trated in Figure 18.
2.Place center insert log (#3) as illustrated in Figure 19.
3.Place top left log (#4) and top right log (#5) as illustrated in Figure 20.
4.Make sure open areas of logs line up with burner ports (see Figure 21). Logs will fit securely on chassis. IMPORTANT: Make sure log does not cover any burner ports.
5.Place lava rock around base of heater if desired.
Top Right
Log (#5)
Figure 19 - Installing Center | Figure 20 - Installing Top Left |
Insert Log (#3) | (#4) and Top Right (#5) Logs |
Burner Ports |
|
| Logs |
Figure 21 - Installing Log Set (Top View)
For morevisit www..com