Assembling Mantel

IMPORTANT: More than one person is required to lift assembled mantel. Lift mantel by leg assemblies. Lifting by header or mantel top could damage mantel.

1.Some models require side/corner assembly. For these models, lay leg side on floor. Position leg as shown in

Figure 1. Align bottom and attach with screws provided. Repeat for other side.

2.Each leg assembly will use 3 brackets for stability. Your bracket hardware kit will contain either 1/2" or 3/4" screws. Using two 1/2" or 3/4" screws, install a bracket in the center of each leg assembly and one at each end within 1" of but not over the last pocket hole (see Figure 2).

3.For all models, place header between right and left leg as- semblies (see Figure 3). Make sure header and legs are snug against each other. The top of header must be flush

with tops of leg assemblies. Attach header using 1 1/4" in pocket holes on each leg assembly as shown in Figure 4. Be sure you have proper alignment between the header and leg assemblies. Attach flat brackets with 1/2" or 3/4" screws using 1 flat bracket and 4 screws per side (see

Figure 4).

1 1/4" Screws

Figure 1 - Assembling Legs

 

Brackets

1/2" or 3/4"

 

Screw

1/2" or 3/4" Screw

Figure 2 - Attaching Brackets

Right Leg

Assembly

Header

Left Leg

Assembly

 

Figure 3 - Installing Header

Leg

 

Assembly

1/2" or 3/4" Screws

 

 

Flat Bracket

 

Header

1 1/4" Screws

Figure 4 - Attaching Header to Leg Assembly (Mantel May

Vary from Illustraton)

Assembling Mantel Top

1.Some models may require mantel top assembly. For these models attach sides of top assembly to front panel of top assembly using (6) 1 1/4" screws (see Figure 5).

2.Place mantel top on floor with right side down. Attach side/front assembly to mantel top using (11) 1 1/4" screws (see Figure 6, page 3).

3.Place unfinished middle support halfway between two sides and attach to top and front using (6) 1 1/4" screws (see Figure 7, page 3).

4.Install 5 brackets using 1/2" or 3/4" screws for support of mantel top as shown in Figure 8, page 3.

Front Panel

of Top

Assembly

Sides of Top

Assembly

Figure 5 - Attach Sides to Front of Mantel Top

www.desatech.com

119794-01A

Page 1 Page 3
Page 2
Image 2
Desa W32KCSA, W32KPA installation instructions Assembling Mantel Top
Page 1 Page 3

W32KPA, W32KCSA specifications

Desa W32KPA and W32KCSA are innovative heating solutions designed to address the growing demand for efficient and environmentally-friendly climate control systems. These devices are particularly notable for their advanced technology and user-friendly features.

One of the main features of the Desa W32KPA and W32KCSA is their high energy efficiency. Both units utilize cutting-edge heating technologies that significantly reduce energy consumption compared to traditional heating methods. This not only leads to lower utility bills for consumers but also contributes to a smaller carbon footprint, making them an environmentally responsible choice.

The W32KPA model is designed for more versatile heating applications, suitable for residential use, while the W32KCSA is tailored for larger spaces requiring efficient climate control. The adaptability of these models makes them ideal for a variety of settings, from homes and offices to workshops and warehouses.

A standout characteristic of both models is their advanced control systems. They come equipped with programmable thermostats that allow users to set their desired temperatures and schedules, resulting in optimal comfort and energy savings. Remote access capabilities are also available, empowering users to adjust settings from their smartphones or tablets, ensuring that their spaces are always at the perfect temperature.

Safety is another critical element in the design of the Desa W32KPA and W32KCSA. These units are equipped with multiple safety features, including overheat protection and automatic shut-off mechanisms, ensuring peace of mind for users.

Durability is also a hallmark of these heating solutions. Built with high-quality materials, the W32KPA and W32KCSA are designed to withstand the rigors of daily use while providing reliable performance over time. This longevity makes them a cost-effective investment for consumers looking to enhance their heating systems without the worry of frequent replacements.

In summary, the Desa W32KPA and W32KCSA are exemplary heating solutions that blend efficiency, safety, and modern technology. With their unique features and robust performance, they stand out in the market as reliable options for anyone looking to enhance their indoor climate control while supporting sustainable practices. Whether for residential or larger commercial applications, these models exemplify the future of heating technology.
Top Page Image Contents