Desa Tech CGD3018P, CGD3924P, CGD3930P Optional Positioning Of Thermostat Sensing Bulb, Continued

Thermostat

Sensing Bulb

Adhesive-backed Mounting Clip

Do Not Crimp Capillary

OPTIONAL POSITIONING OF THERMOSTAT SENSING BULB

For Masonry and

Factory-built

Metal Fireplace

Continued

30

Thermostat

Sensing Bulb

Adhesive-backed

Mounting Clip

Figure 30 - Locating Thermostat Sensing Bulb on Masonry Fireplace

If you have a factory-built metal fireplace, see Figure 31 for location.

Thermostat

Sensing Bulb

Adhesive-backed

Mounting Clip

Figure 31 - Locating Thermostat Sensing Bulb on Factory-built Metal Fireplace

If your fireplace has glass doors, position sensing bulb directly behind door gap on right bottom side (see Figure 32).

Thermostat

Sensing Bulb

Adhesive-backed

Mounting Clip

Glass

Doors

Figure 32 - Installing Thermostat Sensing Bulb behind Glass Doors

5. The mounting clip must be a minimum of 3" from bottom of fireplace to prevent crimping of capillary. Once you have decided on a location, clean the area thoroughly. Remove the paper backing from the adhesive on back of mounting clip. Press the clip into the new location so that the thermostat sensing bulb will be positioned vertically with the capillary at the bottom (see Figure 33). Slide the thermostat sensing bulb into the clip.

IMPORTANT: Do not crimp capillary.

Capillary

Figure 33 - Positioning the Thermostat Sensing Bulb in the Vertical

Position with the Capillary at the Bottom

102991