INSTALLATION

Continued

12.Turn on power to duplex outlet if previ- ously turned off per warning in column 2, page 12.

13.Plug in blower power cord to duplex outlet

(see Figure 10, page 12).

14.Turn blower on and check for operation. Turn blower off by turning knob fully coun- terclockwise before continuing.

15.Peel off backing paper and stick supplied wiring diagram decal on firebox bottom approximately 12" in from of blower (see

Figure 13).

16.Replace all panels and/or brick bottom panel if previously removed.

Model BK3 Installation

1.Remove knockout plug from louver panel by pressing top and bottom retaining clips.

2.Place BK3 fan assembly between two leg stands with fan blades pointing toward rear of fireplace (see Figure 14).

3.Using screws provided, fasten upper flange of blower bracket to hearth pan and end flanges to leg stands (see Figure 16, page 15).

Note: The wire assembly must be ar- ranged in front of and away from fan blades to reach power receptacle plug.

Screws

BK3 Blower

Leg

Stands

 

Figure 14 - Mounting BK3 Blower

4.Remove 2 connectors from ON/OFF rocker switch located on wiring harness

(see Figure 15).

5.Insert rocker switch into lower lover panel with switch lever pointing outward.

6.Reconnect previously removed wire con- nectors onto switch terminals.

7.Check to make sure power cord is com- pletely clear of blower and that there are no foreign objects in blower. Also, double check all wire leads and make sure wire routing is not pinched or in a precarious position. Correct accordingly.

8.Turn on power to duplex outlet if previ- ously turned off per warning in column 1, page 12.

Variable

Fan Switch

 

Fan Switch

 

 

(N.O.)

 

Off 1 2 Black

 

 

On

Blue

 

 

 

 

Red

 

110/115

(BKT Model

Switch

V.A.C. Black

Only)

Terminals

 

Green

Blower

ON/OFF

White

Motor

 

 

Rocker

 

 

Switch

 

 

Wire Harness

 

 

Connectors

Wiring Diagram

 

 

Decal 12" in

 

Figure 15 - Connecting Rocker Switch

Front of Blower

 

Figure 13 - Location of Wiring Diagram

Decal (Model May Vary From Illustration)

14

www.fmiproducts.com

124970-01A