INSTALLATION

Continued

INSTALLING FIREPLACE HOOD AND SCREEN

1.Attach hood to firebox using screws pro- vided (see Figure 19).

2.Insert each rod through all rings located at top of screen.

3.Insert first rod into rear hole in left side of firebox. Fasten rod to rear hole near center of firebox using #10 x 3/8" Phillips screw provided (see Figure 20).

4.Insert other rod into front hole on right side of firebox and fasten using remaining Phillips screw.

Hood

Top View of Rod Layout

Rear Hole

 

Front

Identification

Hole

Label Location

Rod

Ring

Screen

Screw

Figure 20 - Installing Fireplace Screen

(Model May Vary From Illustration)

Screws

Figure 19 - Screw and Hood Placement

(Model May Vary From Illustration)

Replacement Parts

Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

If your new product is missing a part or has a broken component, please do not return it to the store. Call FMI PRODUCTS, LLC at 1-866-328-4537 to answer questions and replace parts under warranty.

When calling have ready:

your name

your address

model and serial numbers of your heater

how heater was malfunctioning

purchase date

Technical Service

You may have further questions about instal- lation, operation, or troubleshooting. If so, contact FMI PRODUCTS, LLC at 1-866-328- 4537.

When calling please have your model and serial numbers of your heater ready.

You can also visit FMI PRODUCTS, LLC’s web site at www.fmiproducts.com.

16

www.fmiproducts.com

124970-01A