PREPARING THE TOOL
NOTE: This tool is shipped completely assembled. No assembly time or tools are required.
1.After reading and understanding this entire manual, connect tool to air supply (Fig. 18).
2.Depress latch and slide magazine cover open (Fig. 19).
3.Insert a strip of fasteners into the side of the magazine, with points down, in contact with the bottom of the magazine channel
(A) Fig. 20.
4.Push magazine cover closed (Fig. 21).
5.Observe the low fastener indicator (A) Fig. 22 and reload as needed.
6.Adjust directional exhaust deflector (A) Fig. 23, so that the exhaust air or debris will be directed away from the operator. Grasp the deflector and rotate it to the desired position for the current application.
Fig. 18
Fig. 19
A
Fig. 20
Fig. 21
A
A
Fig. 22
Fig. 23
8
