DeVillbiss Air Power Company D25572 FOR GBE4010 AND GBFE6010, FOR GBV7000, GBV7010 GBVE8000

FOR GBE4010 AND GBFE6010

5.Remove the nut from the solenoid post with the panel assembly wire harness. Place one end of the posi- tive (red) battery cable onto this post with the panel assembly wire. Reassemble nut and tighten securely. See Figure 4.

FOR GBV7000, GBV7010,

GBVE8000

5.Remove the nut from the solenoid post and place one end of the posi- tive (red) battery cable onto the post. Reassemble nut and tighten securely. See Figures 5.

Lawn & Garden batteries can come in

two terminal configurations. The Positive (+) and Negative (-) terminals can be oriented so that they are +/- or -/+. See Figure 6. In the unlikely event that the battery terminals are un- marked, we recommend that you return the battery to the retailer for exchange for a properly marked battery or let an authorized service center install the battery for you. Failure to connect the battery properly can possibly cause bodily injury. In addition, extensive engine electrical damage not covered under warranty can result.

6.Attach the other end of the positive (red) battery cable to the positive (+) terminal on the battery.

To Prevent sparks connect the red

(positive) cable to the positive (+) terminal before connecting the black negative cable.

7.Attach one end of the negative (black) cable to the negative (-) terminal on the battery.

8.Attach the other end of the negative (black) cable to the frame as shown. Install the star washer be- tween the cable and the frame. See Figure 7.

Solenoid

Panel

Assembly

Wire

Harness

Figure 4

Nuts Positive (+)

Battery Cable

Solenoid

Figure 5

Figure 6

IMPORTANT: See Figure 6 caution before connecting cable to battery.

Negative (-)

Battery Cable

Star Washer

(-) Negative Battery Cable Connection

Figure 7

D25572 10- ENG