DeVillbiss Air Power Company SP-100-F, MG3-OLPORT-3A warranty Cont’d, Risk from

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

RISK OF

REPAIRS

ATTEMPTED

BY

UNQUALIFIED

ANY ELECTRICAL WIRING OR REPAIRS

ELECTRICAL SHOCK

PERSONNEL

CAN

RESULT

IN SERIOUS

REQUIRED

ON

THIS PRODUCT

SHOULD BE

INJURY OR DEATH BY ELECTROCUTION.

PERFORMED BY AUTHORIZED SERVICE CEN-

(cont’d)

TER PERSONNEL IN ACCORDANCE WITH

ELECTRICAL

GROUNDING:

FAILURE TO

NATIONAL AND LOCAL ELECTRICAL CODES.

MAKE CERTAIN THAT THE ELECTRICAL

PROVIDE ADEQUATE GROUNDING TO THIS

CIRCUIT TO WHICH THE COMPRESSOR IS

PRODUCT COULD RESULT IN SERIOUS

CONNECTED PROVIDES PROPER ELECTRI-

INJURY OR DEATH FROM ELECTROCUTION.

CAL GROUNDING, CORRECT VOLTAGE AND

SEE GROUNDING INSTRUCTIONS.

ADEQUATE

FUSE

PROTECTION.

RISK FROM

THE COMPRESSED AIR STREAM CAN CAUSE

ALWAYS

WEAR

ANSI

Z87.1

APPROVED

SOFT TISSUE DAMAGE TO EXPOSED SKIN

SAFETY GLASSES WITH SIDE SHIELDS WHEN

FLYING OBJECTS

AND CAN PROPEL DIRT, CHIPS, LOOSE

USING THE COMPRESSOR.

PARTICLES AND SMALL OBJECTS AT HIGH

SPEED, RESULTING IN PROPERTY DAMAGE

NEVER POINT ANY NOZZLE OR SPRAYER

OR PERSONAL INJURY.

TOWARD ANY PART OF THE BODY OR AT

OTHER PEOPLE OR ANIMALS.

ALWAYS TURN THE COMPRESSOR OFF AND

BLEED PRESSURE FROM THE AIR HOSE AND

TANK

BEFORE

ATTEMPTING

MAINTENANCE,

ATTACHING TOOLS OR ACCESSORIES.

RISK TO BREATHING

THE COMPRESSED

AIR

FROM YOUR COM-

NEVER INHALE AIR FROM THE COMPRESSOR

PRESSOR IS NOT SAFE FOR BREATHING! THE

EITHER

DIRECTLY

OR

FROM

A

BREATHING

AIR STREAM MAY CONTAIN CARBON MONOX-

DEVICE CONNECTED TO THE COMPRESSOR.

IDE, TOXIC VAPORS OR SOLID PARTICLES.

SPRAYED MATERIALS SUCH AS PAINT, PAINT

WORK

IN

AN

AREA

WITH

GOOD

CROSS-

VENTILATION.

READ

AND

FOLLOW

THE

SOLVENTS,

PAINT REMOVER,

INSECTICIDES,

SAFETY INSTRUCTIONS

PROVIDED

ON

THE

WEED KILLERS, ETC..

CONTAIN HARMFUL

LABEL

OR

SAFETY

DATA

SHEETS FOR

THE

VAPORS AND POISONS.

MATERIAL

YOU

ARE

SPRAYING.

USE A

NIOSH/MSHA APPROVED RESPIRATOR DE-

SIGNED FOR USE WITH YOUR SPECIFIC

APPLICATION.

RISK OF FALLING

A PORTABLE COMPRESSOR CAN FALL FROM

ALWAYS OPERATE COMPRESSOR IN A

A TABLE, WORKBENCH OR ROOF CAUSING

STABLE SECURE POSITION TO PREVENT

DAMAGE TO THE COMPRESSOR WHICH

ACCIDENTAL MOVEMENT OF THE UNIT. NEVER

COULD RESULT IN SERIOUS INJURY.

OPERATE COMPRESSOR ON A ROOF OR

OTHER ELEVATED POSITION. USE ADDI-

TIONAL AIR HOSE TO REACH HIGH LOCA-

TIONS.

RISK FROM

THE COMPRESSOR CYCLES AUTOMATI-

ALWAYS TURN OFF THE COMPRESSOR,

MOVING PARTS

CALLY WHEN THE PRESSURE SWITCH IS IN

BLEED PRESSURE FROM THE AIR HOSE AND

THE ON/AUTO POSITION.

TANK, AND UNPLUG FROM ELECTRICAL

OUTLET BEFORE PERFORMING MAINTE-

NANCE OR ATTACHING TOOLS AND ACCES-

SORIES.

MOVING PARTS CAN CAUSE SERIOUS IN-

DO NOT REMOVE THE PROTECTIVE COVERS

JURY OR DAMAGE IF THEY COME INTO

FROM THIS PRODUCT.

NEVER OPERATE THE

CONTACT WITH YOU OR YOUR CLOTHING.

COMPRESSOR WITH GUARDS OR COVERS

ATTEMPTING TO OPERATE OR REPAIR

WHICH ARE DAMAGED OR REMOVED.

ANY REPAIRS REQUIRED ON THIS PRODUCT

COMPRESSOR WITH PROTECTIVE SHROUDS

SHOULD BE PERFORMED BY AUTHORIZED

REMOVED CAN EXPOSE YOU TO MOVING

SERVICE CENTER

PERSONNEL.

PARTS AND ELECTRICAL SHOCK.

RISK OF BURNS

TOUCHING EXPOSED METAL SUCH AS THE

NEVER TOUCH ANY EXPOSED METAL PARTS

COMPRESSOR HEAD OR OUTLET TUBE CAN

ON COMPRESSOR DURING OR IMMEDIATELY

RESULT IN SERIOUS BURNS.

AFTER

OPERATION.

COMPRESSOR

WILL

REMAIN HOT FOR SEVERAL MINUTES AFTER

OPERATION.

TMPCPOL — 5/1/97

4