Model 550 Tube Severing Tool
REPAIRS AND REPLACEMENT
Disconnect the Drive Unit from the Model 550 Tube Cutter prior to any repairs WARNING:or replacements.
Rotate the drive shaft manually clockwise to rotate the cutter carriage to the desired position.
REPLACEMENT OF THE CUTTER WHEEL
Rotate the Cutter Carriage Assy until you see the Cutting Wheel and the cutter Wheel Securing Pin access hole.
Cutter Wheel Replacement
Take a small screwdriver and a pair of needle nose pliers to remove the Wheel Securing Pin.
Insert a pair of needle nose pliers and take hold of the edge of the Cutter Wheel and remove it from the Model 550 Tube Cutter.
Take the new Cutter Wheel and install it by reversing the removal procedure.
REPLACEMENT OF THE BEARING PLUGS
Rotate the Cutter Carriage Assy until the Bearing Plug that is to be replaced can be seen.
Press out the worn Bearing Plug.
13 |
