Chipping, Maintenance, Cleaning Lubrication

English

a hole the diameter of the centering bit completely through the structure. Then drill the cored hole halfway from each side of the structure.

9.To stop the tool, release the trigger switch. Always turn the tool off when work is finished and before unplugging.

Chipping

D25831, D25851

1.Set the mode selector (F) to chipping mode.

2.Set the impact control dial (G) to desired setting (refer to Electronic Speed and Impact Control).

3.Insert the appropriate chisel and rotate it by hand to lock it into the desired position.

NOTE: For SDS Max® models, only use SDS Max® bits.

4.Adjust the side handle (front or rear position) (C).

5.Depress the trigger switch (A).

6.Apply only enough pressure to engage active vibration control (refer to Active Vibration Control).

7.To stop the tool, release the trigger switch. Always turn the tool off when work is finished and before unplugging.

MAINTENANCE

Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of injury, turn unit off and disconnect tool from power source before installing and removing accessories, before making any adjustments or removing/installing attachments or accessories.

Cleaning

WARNING: Blow dirt and dust out of all air vents with dry air at least once a week. Wear proper ANSI Z87.1 (CAN/CSA Z94.3) eye protection and proper NIOSH/OSHA/MSHA respiratory protection when performing this.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Lubrication

Your tool was properly lubricated before leaving the factory. In from two to six months, depending upon use, take or send your tool to an authorized service center for a complete cleaning, inspection and lubrication. Tools used constantly on production jobs will need relubrication more often. Also, tools “out of service” for long periods should be relubricated before being put back to work.

Accessories

WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product.

Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center.

	MAXIMUM CAPACITY
	D25501	D25601	D25602	D25831
Concrete	1-9/16"	1-9/16"	1-3/4"	–
	(40 mm)	(40 mm)	(45 mm)	–
RPM	490	490	210–415	–
No load BPM	3300	3300	1430–2840	1430–2840

D25601 specifications

The DeWalt D25601 is a powerful and robust demolition hammer designed for professionals who require efficiency and durability in their heavy-duty tasks. This tool is perfect for a range of applications, including chipping, digging, and breaking up concrete, asphalt, and other tough materials. Its exceptional performance makes it a must-have for contractors, electricians, and everyday DIY enthusiasts.

One of the standout features of the D25601 is its high-impact energy. With a remarkable 19.2 joules of impact energy, this hammer delivers exceptional performance, making it easier to break through even the hardest materials. The large hammer mechanism optimizes both energy consumption and impact force, allowing users to complete tough jobs in less time.

The D25601 is equipped with a powerful 1700-watt motor that provides reliable power and performance. This motor ensures consistent power delivery, whether you’re working on horizontal or vertical surfaces. Additionally, the electronic speed control allows users to set and maintain the desired speed during operation, enhancing precision and control.

Another key technology integrated into the D25601 is its anti-vibration system. This innovative feature significantly reduces user fatigue and discomfort during extended use. By minimizing vibrations, users can work longer and more comfortably, enhancing productivity without compromising safety.

The demolition hammer’s durability is further enhanced by its robust construction. It features a heavy-duty housing that protects the internal components from wear and tear, ensuring a long lifespan even in the harshest working conditions. The D25601 is designed to withstand the rigors of daily job site use.

User convenience is also a priority in the design of the D25601. The tool is equipped with a service indicator that alerts users when maintenance is required, minimizing downtime. The adjustable side handle provides improved grip and control, and the depth rod allows for precise and consistent chipping depth, making a variety of applications easier to manage.

In summary, the DeWalt D25601 demolition hammer stands out due to its powerful performance, advanced technologies, and user-friendly features. Whether you’re tackling a large construction project or a home renovation, this demolition hammer delivers the reliability and efficiency needed to get the job done effectively. With its focus on performance and durability, the D25601 is an investment that professionals in the field can rely on for years to come.

DeWalt D25601 Chipping, Maintenance, Cleaning Lubrication, Accessories, Maximum Capacity

Models: D25601