c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)POWER TOOL USE AND CARE

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)BATTERY TOOL USE AND CARE

a)Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

b)Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c)When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d)Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6)SERVICE

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Electrical Safety

The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate. 240 V AC means your tool will operate on alternating current. As little as 10% lower voltage can cause loss of power and can result in overheating. All DEWALT tools are factory tested; if this tool does not operate, check the power supply. Your DEWALT tool is double insulated, therefore no earth wire is required.

•Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with this appliance.

2

Page 3 Page 5
Page 4
Image 4
DeWalt DCD775KLR instruction manual Electrical Safety, Power Tool USE and Care, Battery Tool USE and Care, Service
Page 3 Page 5

DCD775KLR specifications

The DeWalt DCD775KLR is a highly regarded cordless drill driver that combines power, versatility, and convenience, making it an excellent choice for both professionals and DIY enthusiasts. This tool is part of DeWalt's reliable 18V lineup, designed to deliver optimal performance for a wide range of tasks.

One of the standout features of the DCD775KLR is its compact and lightweight design. Weighing in at just 4.7 pounds, this drill is easy to maneuver, reducing operator fatigue during extended use. Its ergonomic handle also provides a comfortable grip, which enhances control and precision while working.

The DCD775KLR is equipped with a high-performance, 2-speed transmission that allows users to switch between speeds of 0-450 RPM for low-speed applications and 0-1500 RPM for high-speed tasks. This versatility makes it suitable for a variety of materials, including wood, metal, and plastic. The drill's variable speed trigger further provides greater control for precise applications.

Another impressive characteristic of the DCD775KLR is its powerful 1/2-inch keyless chuck. This feature allows for quick and easy bit changes without the need for additional tools, maximizing efficiency on the job site. The drill is also capable of delivering up to 350 units watts out (UWO), enabling it to handle tough drilling and fastening tasks with ease.

The DCD775KLR features integrated LED lights that illuminate work areas, providing visibility in dimly lit spaces. This is particularly useful for working in attics, basements, or during evening projects. Moreover, the drill is designed with an all-metal transmission for enhanced durability and longevity, ensuring it stands up to heavy use.

Battery life is critical in a cordless drill, and the DCD775KLR does not disappoint. It comes with two compact 1.5 Ah lithium-ion batteries that maintain consistent power and charge quickly, minimizing downtime. The compatibility with other 18V DeWalt batteries adds to the tool's convenience.

In summary, the DeWalt DCD775KLR stands out with its lightweight design, powerful performance, 2-speed transmission, keyless chuck, integrated LED light, and exceptional battery life. This drill driver embodies the robust construction and innovative technology that DeWalt is known for, making it a reliable choice for any task at hand. Whether you’re a seasoned professional or tackling home improvement projects, the DCD775KLR is engineered to provide the performance and durability needed to get the job done.
Top Page Image Contents