Chuck Key Holder, Chuck Removal, Lubrication

383945/DW100-220 5/3/02 1:15 PM Page 4

your skin, rinse thoroughly with water. If any liquid gets in your eyes, rinse thoroughly with water and call a physician immediately.

	English	Chuck
	English	Open chuck jaws by turning collar with fingers and insert shank of

bit about 3/4" into chuck. Tighten chuck collar by hand. Place chuck key in each of the three holes, and tighten in clockwise direction. It’s important to tighten chuck with all three holes. To release bit, turn chuck counter clockwise in just one hole, then loosen the chuck by hand.

Chuck Key Holder

(May be installed already.)

1.Push double-hole end of holder through the slot in other end of holder (Figure 4.)

2.Slip loop over electric plug and draw loop tight around cord (Figure 5.)

3.Push ends of Chuck Key Handle through two holes in end of holder (Figure 6.)

Chuck Removal

Place chuck key in any one of the three holes in the chuck, as shown in Figure 7. Strike the key sharply in the counterclockwise direction (when viewed from the front of the tool). This will loosen the chuck so that it can be removed by hand.

Chuck Installation

Screw the chuck on by hand as far as it will go. Place the chuck key in any of the three holes in the chuck and strike it sharply in the clockwise direction (when viewed from the front of the tool) as shown in Figure 8. (145-160 in. lbs. of torque is recommended.)

FIG. 5

FIG. 4

FIG. 6

Lubrication

When the tool is taken apart for motor brush replacement a small amount of grease should be added (or redistributed from that remaining in housing) to the gears.

The ball bearings used in this tool are lubricated during manufacture and require no lubrication.

Accessories

Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory for your tool, please contact your local dealer or authorized service center.

If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Company, P.O. Box 158, 626 Hanover Pike, Hampstead, MD 21074 or call 1-800-433-9258.

DW100-220 specifications

The DeWalt DW100-220 is a high-performance power tool designed for professional tradespeople and DIY enthusiasts alike. Engineered with a robust set of features, this model showcases DeWalt’s commitment to durability, reliability, and innovation.

At its core, the DW100-220 boasts a powerful 2200W motor, delivering impressive performance across a variety of applications. This motor not only ensures efficient operation but also provides consistent torque even under heavy loads. The tool is designed for optimal power-to-weight ratio, making it manageable while still packing enough strength to tackle demanding jobs.

One of the standout features of the DW100-220 is its advanced cooling system. This technology minimizes overheating during prolonged use, allowing users to work longer without interruption. The ergonomic design of the tool further enhances user comfort, featuring a soft-grip handle that reduces fatigue during extended sessions. This focus on usability reflects DeWalt's dedication to creating tools that enhance productivity while prioritizing user comfort.

The DW100-220 is also equipped with an electronic speed control feature, which allows users to adjust the speed according to the specific needs of the task at hand. This precision makes it ideal for a variety of materials, from wood to metal, ensuring clean cuts every time. Additionally, the tool includes a built-in LED work light, illuminating the workspace and enhancing visibility in low-light conditions.

Durability is a hallmark of DeWalt tools, and the DW100-220 is no exception. Constructed with high-quality materials, this model is designed to withstand the rigors of daily use on job sites. The protective casing and reinforced components help to ensure longevity, reducing the need for frequent repairs or replacements.

Safety features are also a priority in the design of the DW100-220. A safety lock-off switch prevents accidental startups, providing peace of mind when the tool is not in use. Furthermore, the tool is compatible with a range of attachments and accessories, allowing for enhanced versatility across different projects.

Overall, the DeWalt DW100-220 stands out as a reliable, powerful, and versatile tool that meets the demands of modern construction and renovation tasks. Its combination of advanced features and user-centric design makes it a valuable addition to any toolbox, ensuring both efficiency and safety in every endeavor.

DeWalt DW100-220 Chuck Key Holder, Chuck Removal, Chuck Installation, Lubrication, Accessories

Models: DW100-220