TROUBLESHOOTING
Problem | Possible Cause | Possible Solution |
• Unit will not start. | • Cord not plugged in. | • Plug tool into a working outlet. |
| • Circuit fuse is blown. | • Replace circuit fuse. (If the product |
|
| repeatedly causes the circuit fuse to |
|
| blow, discontinue use immediately and |
|
| have it serviced at a DEWALT service |
|
| center or authorized servicer.) |
| • Circuit breaker is tripped. | • Reset circuit breaker. (If the product |
|
| repeatedly causes thecircuit breaker to |
|
| trip,discontinue use immediately and |
|
| have it serviced at a DEWALT service |
|
| center or authorized servicer.) |
| • Cord or switch is damaged. | • Have cord or switch replaced at a |
|
| DEWALT Center or authorized servicer. |
English
9
